GCC Technologies T500 User Manual page 107

Machine Setting- Carriage Free Page
The Carriage Lock Page allows you to set whether the laser carriage is locked or free. If the Carriage
Free setting is set to <YES>, then you will be able to manually move the laser carriage along the X
and Y axis by hand with the top door open. Whereas setting the Carriage Free to <NO> will lock the
laser carriage, and movement or positioning can only be done by the control panel.

Carriage Free YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
Start / Stop
☼ Navigating to this page:
Carriage Free Page
Back to previous page
Save your current settings
Cycle Carriage Free between YES / NO
Back to Main Work Page
107
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Carriage Free>
from the menu
Carriage Free Page
Function
232002080G(09)