GCC Technologies T500 User Manual page 136

DPI options: 125, 250, 300, 380, 500, 600, 760, 1000, and 1500, experiment with different settings to get
your desired effect.
Below is a chart for your convenience detailing the Set DPI (your input setting) vs. Actual DPI (your output
results).
DPI Setting 125
Actual DPI 127
NOTE
Outputting a full-table job using 300 or 600 DPI will result in a truncation error; this is
due to the large differences in set DPI vs. actual DPI output for those two particular
DPI settings. Therefore, when processing a full-table job using 300 DPI, we
recommend you move to the next higher DPI setting of 380. Similarly, for a full-table
job using 600 DPI, we recommend you use 760 DPI.
Mirror (Option Page)
Checking this box will automatically engrave your image with a mirrored effect. This setting will flip the
image along the Y-axis from left to right and vice-versa.
TIP
When engraving a stamp, via the stamp mode, the stamp image needs to be engraved
in reverse (mirrored) for the final stamp to be correctly laid out.
Invert (Option Page)
Checking this box automatically inverts / reverses the color of your image (the white areas become black
and vice versa). The Invert option is not available if disabled with Manual Color File mode is selected.
250 300 *
254 381
[DEFAULT SETTING: Unselected]
Mirror Effect
[DEFAULT SETTING: Unselected]
136
380 500 600 *
381 508 762
232002080G(09)
760 1000 1500
762 1016 1524