Table of Contents
Advertisement
3)
For mirror 3, at the left hand side of X-axis, take the two screws off and remove the cover.
4)
For mirror 4, at the top of carriage, take the two screws off and remove the cover
NOTE
Do not loosen the wrong screws of mirror 1,2 and 3, in case that the optical
path may change.
The covers of mirrors 2 and 3 have to be taken off as well for adjusting the
optical path.
5)
For mirror 1, mirror 2 and mirror 3, release the mirror securing screws and pull the mirror out
carefully.
6)
Use a rubber blower to blow away any dust from the surface of the mirror.
186
Mirror 3
.
Mirror 4
232002080G(09)
Advertisement
Table of Contents
