GCC Technologies T500 User Manual page 28

I. AIR COMPRESSOR INSTALLATION
1) Remove the plugs on the air compressor to expose the air inlets.
2) Fasten the included air tube fastener valve to the outgoing air inlet (indicated by 2a) and the
air filter into the ingoing air inlet (indicated by 2b).
3) Connect a ¼" tubing to the air tube fastener valve on the air compressor.
4) On the rear right side of T500 to locate both the Air-Assist Valve and Internal Power Sockets,
as indicated below:
Air Assist Valve for "Air
Function " Control by
Pen in Laser Print Driver
28
Air Assist Valve for
preventing 150/
200W laser tube
from frosting
232002080G(09)