Carriage Moving Page
The Carriage moving page allows you to manually increase and decrease the height of the work
table (Z-axis). In addition, you can manually adjust the Y-axis and X-axis of the laser carriage.
Relevant Buttons
F1 (Back)
/ Directional
/ Directional
Start / Stop
☼ Navigating to this page:
Carriage Moving Page
Back to previous page
Manually adjust the Y-axis position of the laser
carriage
Manually adjust the X-axis position of the laser
carriage
Back to Main Work Page
93
Main Work Page
Press , , , , or F3
Carriage
Moving Page
Function
232002080G(09)