GCC Technologies T500 User Manual page 152

Use Cluster (Advance Page)
This setting allows you to change how the T500 interprets and processes individual / independent areas of
an image in order to minimize job-processing times. The Cluster function is only applicable when multiple
areas of an image are broken down and isolated from each other (areas not touching each other, blank
space in-between). Another condition that must be met for the Cluster function is that these individual
areas of your design must have some X-axis overlap, meaning that they should be to some extent side-by-
side with empty spaces between them. The distance value can be set by the user and represents the limit
or cutoff point in which side-by-side objects will be processed in Cluster mode or not. If the distance
between side-by-side objects is greater than the set distance value, then the individual areas will be
processed in Cluster mode. Conversely, if the distance between side-by-side objects is lesser than the set
distance value, then the individual areas will be processed normally (not via Cluster mode).
Decal layer No. 2:
Die cutting pen (Cut
through)
Decal layer No.1: Kiss-
cutting pen (half cut)
[DEFAULT SETTING: Unselected]
152 232002080G(09)