GCC Technologies T500 User Manual page 137

TIP
Invert mode is useful when creating a stamp in Stamp Mode, as inverting your normal
image will set the negative space to be engraved out, with the remaining positive space
(your stamp design) protruding out.
Print Immediately (Option Page)
Checking this will instruct the LaserPro T500 to immediately begin the laser engraving process, when you
select Print from your graphic software program. If Print Immediately is not checked, then selecting Print
will transfer the job file to the LaserPro T500 system and will need to be initialized from the LaserPro T500
control panel.
SmartACT (Option Page)
By eliminating unnecessary travel of the lens carriage at the expense of some quality,
SmartACT reduces the acceleration area to save of time to process a job~!
TIP
There is a greater performance gain when enabling SmartACT for designs that are
vertically longer than they are horizontally wide, as the SmartACT optimization modifies
the movement of the X-axis of the laser carriage.
Preview (Options Page)
Users can use the Preview function to check a simulated output of the job. An estimated working time
will also be shown. Please make sure to set the file printing option to "print to file" in order to activate
the Preview function. Using Spirit LS as illustration
Invert Effect
[DEFAULT SETTING: Unselected]
[DEFAULT SETTING: Unselected]
137 232002080G(09)