1. Manuals
  2. Brands
  3. GCC Technologies Manuals
  4. Printer
  5. 16
  6. User manual

GCC Technologies 16 User Manual

Gcc elite color 16 series printer user's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GCC Elite Color 16 Series Printer
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for GCC Technologies 16

Summary of Contents for GCC Technologies 16

  • Page 1 GCC Elite Color 16 Series Printer User’s Guide...

  • Page 2: Proprietary Statement

    Laboratories. Ethernet/Xerox Corporation. Proprietary Statement The digitally encoded software included with your GCC Elite Color 16 Laser Printer is Copyrighted © 2003 by GCC Technologies, Inc. All Rights Reserved. This software may not be reproduced, modified, displayed, transferred, or copied in any form or in any manner or on any media, in whole or in part, without the express written permission of GCC Technologies.

  • Page 3: Table Of Contents

    Printer Orientation 3 About the Printer 3 Features 3 Available Configuration 4 Safety Precautions 4 Conventions 5 Installing and Relocating Your Printer 5 Other Precautions 7 Precautions for Power and Ground Connections 7 Cautions 8 Other Precautions 9 Operating Precautions 9...
  • Page 4 GCC Elite Color 16 Series User’s Guide Chapter 1 Unpacking and Installing the Printer 1-1 Positioning the Printer 1-2 Installation Environment 1-2 Minimum Installation Clearances 1-3 Accessories 1-4 Transporting the Printer 1-7 Installation Procedure 1-8 Removing the Packing Tape 1-8...
  • Page 5 Paper Jams Between the Drum Cartridge and Fuser Unit 4-7 Paper Jams in the Paper Rotator 4-9 Paper Jams in the High Capacity Feeder (Trays 3/4) 4-10 Chapter 5 Consumables 5-1 Consumables Overview 5-2 Toner Cartridges 5-2 Drum Cartridge 5-2 GCC Elite Color 16 Series User’s Guide...
  • Page 6 GCC Elite Color 16 Series User’s Guide Transfer Roller Cartridge 5-3 Fuser Unit 5-3 Paper Feed Roller 5-4 Toner Cartridges 5-4 Toner Cartridge Handling Precautions 5-4 Replacing Toner Cartridges 5-5 Drum Cartridge 5-8 Drum Cartridge Handling Precautions 5-8 Replacing the Drum Cartridge 5-9...
  • Page 7 GCC Worldwide Offices A-3 GCC Part Numbers A-4 Printers A-4 Paper Handling Options A-4 Consumables A-4 Appendix B Safety Notes and Regulatory Compliance B-1 Safety Notes B-2 Regulatory Compliance B-2 Safety Compliance B-2 EMC Compliance B-3 GCC Elite Color 16 Series User’s Guide...
  • Page 8 GCC Elite Color 16 Series User’s Guide Appendix C Printing Font Summaries C-1 Printing a Font Summary C-2 PostScript Font Summary C-3 PCL Font Summary C-7 Appendix D Notes on Matching Printed Colors with Display Colors D-1 Printed Colors vs. Display Colors D-2...

  • Page 9: Preface

    Preface In this Chapter . . . • “Welcome” on page 2 • “About this Manual” on page 2 • “About the Printer” on page 3 • “Safety Precautions” on page 5...

  • Page 10: Chapter 6 Options

    About this Manual Welcome Thank you for selecting the GCC Elite Color 16 Series laser printer. This User Guide contains important information about the operation and care of your printer. Please read this manual in its entirety and keep it at hand for later reference. You may find it helpful to print out a copy of this document and/or keep a copy on your computer’s hard drive.

  • Page 11: Printer Orientation

    Throughout this guide, the four sides of the printer are referred to as front, rear, right, and left. The front of the printer is the side near the control panel, and the rear of the printer is opposite the front. The left and right sides of the printer are defined as the sides to the left and right, respectively, of a person who is facing the front of the printer.

  • Page 12: Available Configuration

    • Network-readiness: the standard configuration of the printer includes an Ethernet Net- work Interface Card. Available Configuration The Elite Color 16 Series printer is available in the following configuration: Standard Configuration (Elite Color 16DN) • Memory: 128 MB •...

  • Page 13: Safety Precautions

    NOTE: A note is a tip or extra information that may be helpful in installing or using the printer. CAUTION: A caution message provides information that may help you avoid equipment dam- age, process failure, or inconvenience. Read all caution messages carefully. GCC will not be responsible for damage that results from improper use of the printer.
  • Page 14 Safety Precautions There is danger of the printer falling. When lifting the printer, get a firm footing and bend your knees to avoid possible inju- ries to your back. The printer has ventilation holes on the rear panel. Ensure that the printer is installed no less than 6 inches (150 mm) from the wall on the right, 4 inches (100 mm) from the wall on the left, and 8 inches (200 mm) from the wall at the back.

  • Page 15: Other Precautions

    82˚F (28˚C). NOTE: Do not place the printer in a room where there are sudden fluctuations in temperature, and do not move the printer from a cold place to a warm humid place. If you do, condensation may occur within the printer and print quality may deteriorate.

  • Page 16: Cautions

    Always use the power cord provided with your printer. When an extension power cord is required, always use a properly rated cord. If you use a cord with an unspecified current rating, the printer or plug may emit smoke or become hot to the touch.

  • Page 17: Other Precautions

    Liquids spilled on the printer constitue a fire and electrical shock hazard. Do not place any metal parts such as staples or clips on the printer. If metal and flam- mable parts get into the printer, they can short-circuit internal components, and cause fire or electric shocks.
  • Page 18 Turn off the printer immediately and contact your GCC Customer Support Center. Do not place any heavy objects on the printer. An off-balance printer can fall over or the heavy object can fall, causing injuries.

  • Page 19: Notes On Handling Consumables

    GCC Elite Color 16 Series User’s Guide Safety Precautions Notes on Handling Consumables Never throw a toner cartridge into an open flame. It can cause an explosion and injuries. Never throw a transfer roller cartridge into an open flame. It can cause an explosion and injuries.
  • Page 20 • If you swallow toner, induce vomiting and consult your physician immediately. • When you remove the transfer roller cartridge from the printer because the waste toner collection box is full, do not attempt to empty the waste toner box and reuse the cartridge, as toner may spill inside the printer and cause damage.

  • Page 21: Unpacking And Installing The Printer

    “Selecting a Display Language” on page 1-25 • “Adjusting Color Registration” on page 1-26 • “Installing Printer Drivers and Locating User Documentation” on page 1-28 • “Printing a Configuration Summary” on page 1-30 • “Printing PCL and PostScript Font Lists” on page 1-32 •...

  • Page 22: Positioning The Printer

    82˚F (28˚C). NOTE: Do not position the printer in a room where there are sudden temperature fluctuations. Do not move the printer from a cool, dry location to a warm, humid location. Sudden temperature fluctuations can cause water droplets (condensation) to form inside the printer and cause the print quality to deteriorate.

  • Page 23: Minimum Installation Clearances

    CAUTION: To avoid obstruction of the ventilation grills on the back and the side of the printer, position the printer no less than 6 in. (150 mm) from the wall on the right side, 4 in. (100 mm) from the wall on the left side, and 8 in. (200 mm) from the wall at the back. Obstructing the ventilation grills can cause the printer to overheat and become a fire hazard.

  • Page 24: Accessories

    The standard printer package consists of the following items. Before installing the printer, con- firm that all the items listed below are accounted for. NOTE: Keep the box and packaging in case you need to transport the printer over long distances in the future. NOTE: For information about optional accessories for the printer, please literature accompanying the optional accessories.
  • Page 25 GCC Elite Color 16 Series User’s Guide 1-5 Accessories Drum cartridge Toner cartridges: (Black, Yellow, Magenta, Cyan) Power Cord...
  • Page 26 GCC Elite Color 16 Series User’s Guide Accessories Tray cover NOTE: The tray cover does not come standard with the printer. GCC Elite Color 16 Series Software and Documentation CD-ROM...

  • Page 27: Transporting The Printer

    • To lift the printer, face the front and back of the printer and grip the recessed areas at the bottom left and right with both hands. Never try to lift the printer by gripping any other areas. Lifting the printer by gripping other areas can cause the printer to fall, resulting in injury.

  • Page 28: Installation Procedure

    Removing the packing tape When you first remove the printer from its box, there is packing tape in 8 places to secure the covers during shipping. Refer to the illustrations below and remove all the packing tape from the printer.

  • Page 29: Removing The Spacers

    A spacer is installed in the paper tray to protect it from shock and vibrations during shipping. Remove the spacer before using the printer. Follow the procedure below to remove the spacer from the paper tray. NOTE: Keep the spacer in case you need to transport the printer over long distances in the future.
  • Page 30 1-10 GCC Elite Color 16 Series User’s Guide Installation Procedure Gently pull out the paper tray until it stops. Hold the tray with both hands, lift the front up slightly and pull it completely out of the printer. NOTE: Place the tray on a flat surface.
  • Page 31 NOTE: Keep the spacer in case you need to transport the printer over long distances in the future. Holding the paper tray with both hands, align it with the opening in the printer and gently insert it. Push the paper tray completely back into the printer.

  • Page 32: Installing The Drum Cartridge

    1-12 GCC Elite Color 16 Series User’s Guide Installation Procedure Installing the Drum Cartridge Follow the procedure below to install the drum cartridge. Push up button ‘A’ 1 and fully open the front cover 2. Open the paper outlet cover.
  • Page 33 Pull the seals completely out. NOTE: Keep the aluminum package of the drum cartridge in case you need to transport the printer over long distances in the future. Hold the left and right sides of the drum cartridge and remove the protective cover from GCC Elite Color 16 Series User’s Guide 1-13...
  • Page 34 1-14 GCC Elite Color 16 Series User’s Guide Installation Procedure Remove the protective sheet from the drum cartridge as shown in the illustration. NOTE: Do not touch the transfer roller (black colored part). Make sure nothing touches or scratches the roll surface.

  • Page 35: Installing The Toner Cartridges

    NOTE: Do not touch the transfer roller. Lowering the cartridge into the printer without correctly aligning the shafts with the slots can damage the cartridge. Do not allow the surface of the transfer roller to come into contact with anything.
  • Page 36 1-16 GCC Elite Color 16 Series User’s Guide Installation Procedure Remove the top cover. Select the new toner cartridge whose color matches the label on the insertion point and remove it from its packaging.
  • Page 37 Shake the toner cartridge 7 or 8 times as shown in the illustration to distribute the toner evenly. Align the toner cartridge with the corresponding insertion point in the printer and insert it as shown in the illustration. Grip the levers at each end of the toner cartridge with your fingers, then push down lightly to rotate the levers forward.
  • Page 38 1-18 GCC Elite Color 16 Series User’s Guide Installation Procedure Pull the toner seal straight up to remove it. NOTE: Pull the toner seal straight up. Pulling the toner seal diagonally may tear the seal. Repeat steps 2 - 6 Replace the top cover.

  • Page 39: Loading Paper

    See “Loading Paper in the Multi Purpose Tray” on page 2-15 manual feed tray. Pull the paper tray out until it stops. GCC Elite Color 16 Series User’s Guide 1-19 Installation Procedure for information about the types of paper suitable for printing.
  • Page 40 1-20 GCC Elite Color 16 Series User’s Guide Installation Procedure Hold the tray with both hands lift up the front slightly and remove it from the printer. NOTE: Place the tray on a flat surface. Move the end and side paper guides to their outermost positions. Gently lift the end paper guide to move it.
  • Page 41 Pushing the paper guides too hard against the edges of the paper stack can cause a paper jam. However, if the paper guide is too loose, the paper may twist as it feeds through the printer. GCC Elite Color 16 Series User’s Guide 1-21...
  • Page 42 1-22 GCC Elite Color 16 Series User’s Guide Installation Procedure Hold the paper tray with both hands, align it with the opening in the printer and gently insert it. Push the paper tray completely back into the printer. NOTE: Do not use excessive force on the paper tray.

  • Page 43: Installing The Tray Cover

    NOTE: The tray cover does not come standard with the printer. Clip the hooks on the tray cover onto the 2 tabs at the back of the printer as illustrated. Connecting the Power Cord Follow the procedure below to connect the power cord.

  • Page 44: Turning The Printer On

    Power On Self Test ends with the top line of the display reading: NOTE: While turned on, the printer will go into the standby state if it remains idle for a period of time. If an error message appears, see...

  • Page 45: Selecting A Display Language

    Press NEXT or PREVIOUS until the desired default language appears on the bottom line of the display. Press SELECT. You have now changed the default language. GCC Elite Color 16 Series User’s Guide 1-25 Selecting a Display Language Menu Paper Menu...

  • Page 46: Adjusting Color Registration

    To obtain the best color print quality, the printer must be aligned so that all four color planes are positioned correctly on the printed page. This alignment is done in two parts:...

  • Page 47: Adjusting Printer Alignment Settings

    Adjusting Black Ink Alignment Adjust the K-V ADJUST and K-H ADJUST values until the box around the outside of the page is centered within the printed page. GCC Elite Color 16 Series User s Guide Adjusting Color Registration Adjustment Vertical alignment for BLACK (K) ink.

  • Page 48: Installing Printer Drivers And Locating User Documentation

    To install printer drivers and other software for Windows (Windows 95 and later), insert the Elite Color 16 Series CD-ROM into the PC. The main CD window will open. Click on “Printer Software” to access the software installers. Follow the instructions on-screen to run through the installation process.

  • Page 49: Locating User Documentation

    To locate other documentation that will assist you in operating and maintaining your printer, go to the MANUALS folder on the Elite Color 16 Series CD-ROM. You can open and read these manuals directly from the CD-ROM, save the manuals to the hard drive of your computer, or print the manuals.

  • Page 50: Printing A Configuration Summary

    Printing a Configuration Summary Printing a Configuration Summary Your printer can print a configuration summary that lists the currently selected status of menu options, media selections in trays, options installed and other relevant information about your printer. To print a Configuration Summary, follow these steps:...
  • Page 51 GCC Elite Color 16 Series User’s Guide 1-31 Printing a Configuration Summary...

  • Page 52: Printing Pcl And Postscript Font Lists

    Printing PCL and PostScript Font Lists Printing PCL and PostScript Font Lists Your printer has the capability of printing lists of all installed PCL or PostScript fonts. To print a Font List, follow these steps: From the Ready status, press MENU, the control panel display will read:...

  • Page 53: Turning The Printer Off

    GCC Elite Color 16 Series User’s Guide 1-33 Turning the Printer Off Turning the Printer Off Remember to turn off the printer at the end of day or when the printer will not be used for an extended period of time. NOTE: When the printer is turned off, all print data still in memory will be erased.

  • Page 54: Maintenance

    Maintenance In this Chapter . . . • “About this Chapter” on page 2-2 • “Names and Functions of the Printer’s Parts” on page 2-2 • “Paper Handling” on page 2-6 • “Cleaning” on page 2-21 • “Transporting the Printer” on page 2-24...

  • Page 55: Names And Functions Of The Printer's Parts

    Allow internal heat to dissipate. Make sure the grilles are never obstructed. The printer’s power switch. Press [ I ] to turn the printer on, and [ O ] to turn it off. Use button B to open the upper part of the front cover.

  • Page 56: Control Panel

    GCC Elite Color 16 Series User’s Guide 2-3 Names and Functions of the Printer’s Parts Control Panel Display READY POWER START/STOP POWER SAVER NEXT CANCEL STATUS MENU RETURN SELECT ACTIVE FAULT PREVIOUS Buttons Indicators...

  • Page 57: Rear View

    GCC Elite Color 16 Series User’s Guide Names and Functions of the Printer’s Parts Rear View Name Interface Connector Power Cord Connector Exhaust Grille Toner Cartridges Top Cover (face down tray) Description Connect the printer to your computer or network here.

  • Page 58: Internal View

    Drum Cartridge Paper Outlet Cover Paper Rotator Fuser Unit GCC Elite Color 16 Series User’s Guide 2-5 Names and Functions of the Printer’s Parts Cover open with button B Description Transfers the image created on the drum surface to the paper, and collects used toner.

  • Page 59: Selecting Print Media

    Your printer can print on a variety of media, including plain paper, labels, transparencies, and envelopes. Always use print media that meet the guidelines for use with this printer. Print media that is not recommended for use with this printer may cause frequent paper jams or poor print quality.

  • Page 60: Print Media Weight, Type, And Size

    550 sheet paper feeder) Do not use label stock or other special media in the 500 sheet paper tray. Front Tray GCC Elite Color 16 Series User s Guide Selecting Print Media Basis Weight Paper Type/Size Plain Paper: US Letter 16 to 28lb.

  • Page 61: Suitable Paper Types

    GCC Elite Color 16 Series User s Guide Selecting Print Media Suitable Paper Types Paper Trays, Types, and Sizes You can load the following types of paper into the paper tray or multi purpose tray. Feeding Method Multi Purpose Tray...

  • Page 62: Unsuitable Paper Types

    Unsuitable Paper types Avoid using the following paper types as they can cause paper jams or damage to the printer. • Color transparency sheets (bordered by white frame). • Ink jet paper • Paper that is too thick or too thin •...

  • Page 63: Storing Paper

    2-10 GCC Elite Color 16 Series User’s Guide Loading Paper Storing Paper Failure to store paper properly can cause paper jams, deteriorate print quality, and/or damage to the printer. Store paper under the following conditions: • Between 50 and 86˚F (10˚C and 30˚C) •...
  • Page 64 Hold the tray with both hands, lift the front slightly and pull it completely out of the printer. NOTE: Place the tray on a flat surface. Move the end and side paper guides to their outermost positions. Gently lift the end paper guide to move it. GCC Elite Color 16 Series User’s Guide 2-11 Loading Paper...
  • Page 65 2-12 GCC Elite Color 16 Series User’s Guide Loading Paper NOTE: You do not need to move the paper guides if you are refilling the tray with paper of the same size. Grip the end paper guide with your fingers and gently lift it up. Insert the pins at the bot-...
  • Page 66 Align the four corners of the paper stack and insert the paper (print side up) under the tab. NOTE: Do not use paper that is folded, creased, or heavily warped. Do not overload the paper tray. Align the side guides with the edges of the paper. GCC Elite Color 16 Series User’s Guide 2-13 Loading Paper...
  • Page 67 Pushing the paper guides too hard against the edges of the paper stack can cause a paper jam. However, if the paper guides are too loose, the paper may twist as it feeds through the printer. Hold the paper tray with both hands, align it with the opening in the printer and gently insert it.

  • Page 68: Loading Paper In The Multi Purpose Tray (Tray 1)

    To avoid damage to the tray, do not use excessive force or place heavy objects on the tray. Align the paper guide with the mark of the desired paper size. GCC Elite Color 16 Series User’s Guide 2-15 Loading Paper...
  • Page 69 2-16 GCC Elite Color 16 Series User’s Guide Loading Paper NOTE: When printing on long paper, pull out the tray extension. Printing long paper with the tray extension retracted can cause the paper to fall out or make feeding impossible.

  • Page 70: Loading Transparency Sheets In The Multi Purpose Tray (Tray 1)

    Remove each transparency sheet from the face down tray as soon as it is ejected. If transparency sheets are allowed to accumulate in the face down tray, static electricity can build up and cause a jam. GCC Elite Color 16 Series User s Guide Loading Paper 2-17...
  • Page 71 Fan a few transparency sheets at a time. Insert the transparency sheets into the multi purpose tray until they lightly touch the feed- ing slot. NOTE: Do not use full color transparency sheets. They can jam in the printer and damage the fuser unit.

  • Page 72: Loading Postcards In The Multi Purpose Tray (Tray 1)

    Do not use envelopes smaller than 3.5 inches wide and 5.5 inches long (88.9 mm wide and 139.7 mm long). Load the envelopes with the flap pointing outward. Using poor quality envelopes can cause creasing and deteriorate print quality. GCC Elite Color 16 Series User’s Guide 2-19 Loading Paper...
  • Page 73 2-20 GCC Elite Color 16 Series User’s Guide Loading Paper 5.5 in (139.7 mm) or larger 3.5 in (88.9 mm) or larger...

  • Page 74: Cleaning

    If some stains prove difficult to remove, use a cloth moistened with a mild neutral detergent.We recommend that you clean the printer at least once a month to keep it in good working condition and to maintain print quality.

  • Page 75: Storing The Printer

    Follow the procedure below when you do not need to use the printer for a long period. On the right side of the printer, press [O] on the power switch to turn off the printer. Disconnect the power cord, interface cable, and any other cables.
  • Page 76 Storing the Printer Remove any remaining paper from the paper tray and store it in a dry, dust-free place. NOTE: If the paper proves difficult to remove, pull the tray completely out of the printer and try removing the paper again.

  • Page 77: Transporting The Printer

    • To lift the printer, face the front and back of the printer and grip the recessed areas at the bottom left and right with both hands. Never try to lift the printer by gripping any other areas. Lifting the printer by gripping other areas can cause the printer to fall, resulting in injury.
  • Page 78 On the right side of the printer, press [O] on the power switch to turn off the printer. Disconnect the power cord, interface cable, and any other cables. WARNING: To prevent electric shock, never touch the power plug with wet hands.
  • Page 79 2-26 GCC Elite Color 16 Series User’s Guide Transporting the Printer Gently pull out the paper tray until it stops. Hold the tray with both hands, lift the front up slightly and pull it completely out of the printer. Remove the paper from the paper tray, and store it in a dry, dust-free place.
  • Page 80 Insert the cardboard spacer in the tray as illustrated on the left. Hold the paper tray with both hands, align it with the opening in the printer and gently insert it. Push the paper tray completely back into the printer.
  • Page 81 2-28 GCC Elite Color 16 Series User’s Guide Transporting the Printer Remove the optional tray cover, if equipped. Push up button ‘A’ 1 and fully open the front cover 2. Open the paper outlet cover.
  • Page 82 Wrap the drum cartridge in its aluminum package or thick paper to avoid exposing it to direct sunlight or other strong light. Close the paper outlet cover. GCC Elite Color 16 Series User’s Guide 2-29 Transporting the Printer Transfer roller...
  • Page 83 To protect the printer from damage, pack it in a box before transporting it. NOTE: After moving the printer to the new location, you need to readjust the color registration. For details, refer to “Adjusting Color Registration” on page 1-26.

  • Page 84: Chapter 3 Dealing With Problems

    In this Chapter . . . • “About this Chapter” on page 3-2 • “Troubleshooting” on page 3-2 • “Solving Printer Power-on Problems” on page 3-11 • “Control Panel LCD Messages” on page 3-12 • “Ethernet Network Interface Troubleshooting” on page 3-14...

  • Page 85: Troubleshooting

    Troubleshooting When your printer suffers from a problem, refer to one of the four categories below to deter- mine the cause of your problem, and the action needed to rectify it.

  • Page 86: Print Quality Problems

    The drum cartridge is old or damaged. Vertical black streaks The drum cartridge, transfer roller, or fuser unit is old or damaged. GCC Elite Color 16 Series User’s Guide 3-3 Troubleshooting Action Replace the media with a recommend size and type, and confirm that your printer driver settings...
  • Page 87 GCC Elite Color 16 Series User’s Guide Troubleshooting Description Cause Recurring smudges Dirt in the paper path. The drum cartridge, transfer roller, or fuser unit is old or damaged. Ink smears when rubbed The paper is damp. The paper is outside the recommended specification range.
  • Page 88 Shadows appear around areas of dense black printing Color around the edge of The color registration is incorrect. printing is incorrect GCC Elite Color 16 Series User’s Guide 3-5 Troubleshooting Action Replace the paper. Replace the paper with a recommend size and type, and confirm that your printer driver settings...
  • Page 89 GCC Elite Color 16 Series User’s Guide Troubleshooting Description Cause Partial blanks, creased paper The paper is damp. or blotted printing The paper is outside the recommended specification range. The transfer roller or fuser unit is not installed correctly. Action Replace the paper.

  • Page 90: Paper Transport Problems

    The paper is damp. There is paper jammed in the printer. The printer is not level. The paper feed roller has deteriorated. GCC Elite Color 16 Series User’s Guide 3-7 Troubleshooting Action Reinstall the drum cartridge. See “Drum Cartridge” on page 5-8.

  • Page 91: Other Problems

    Cleaning the Density Sensor When the printer’s density sensor is dirty, follow the procedure below to clean it. Push the [ O ] mark on the power switch to turn off the printer. Action Reposition the printer on a flat, stable surface.
  • Page 92 Push up button ‘A’ and fully open the front cover Grip the tabs at both ends of the transfer roller and gently lift it out of the printer. NOTE: Lift the roller carefully to prevent waste toner from spilling out.
  • Page 93 Insert the pins at both ends of the transfer roller cartridge into the U-shaped bearings inside the printer. To lock the transfer roller cartridge into the printer, push down on the base of the tabs until you hear a click.

  • Page 94: Solving Printer Power-On Problems

    This section describes problems that can occur when starting up the printer. If the trouble per- sists after performing the checks listed below, turn the printer off [ O ], disconnect the power cord from the AC outlet, and see support or service or repair call.

  • Page 95: Control Panel Lcd Messages

    3-12 GCC Elite Color 16 Series User’s Guide Control Panel LCD Messages Control Panel LCD Messages LCD MESSAGE (LINE 1) TONER Y MISSING TONER M MISSING TONER C MISSING TONER K MISSING PHD MISSING BTR MISSING FUSER MISSING BAD PHD TYPE...
  • Page 96 REPLACE PHD BTR LIFE OVER REPACE BTR FUSER LIFE OVER REPLACE FUSER SERVICE ERROR XX GCC Elite Color 16 Series User’s Guide 3-13 Control Panel LCD Messages CTD sensor dustiness is Clean CTD sensor detected. Front cover is open. Close front cover.

  • Page 97: Ethernet Network Interface Troubleshooting

    3-14 GCC Elite Color 16 Series User’s Guide Ethernet Network Interface Troubleshooting Ethernet Network Interface Troubleshooting This section offers various troubleshooting procedures and technical support advice for the Ethernet network interface. Power-Up Troubleshooting There are several possible error situations if the unit does not display the welcome message or the LEDs do not flash:...

  • Page 98: Technical Support

    Technical Support as listed in Appendix A. If possible, you should print a Configuration page from the printer to have available when calling. When you report a problem, please provide the following information: •...

  • Page 99: Paper Jams

    Paper Jams In this Chapter . . . • “About this Chapter” on page 4-2 • “Clearing Paper Jams” on page 4-2...

  • Page 100: Clearing Paper Jams

    5. Paper jam in the High Capac- ity Feeder (Trays 3/4) CAUTION: Make sure to remove all the paper scraps from the printer when clearing paper jams. Paper scraps remaining inside the machine can result in fire. To avoid injury or burns, do not use excessive force to remove jammed paper that is difficult to remove or wound tightly...

  • Page 101: Paper Jams In The Multi Purpose Tray (Tray 1)

    CAUTION: If smoke comes out of the printer when a paper jam occurs, do not open the printer covers. Turn off the power, remove the power cord from the AC outlet, and contact your GCC dealer or GCC Technical Support at 781-276-8620 for assistance.
  • Page 102 GCC Elite Color 16 Series User’s Guide Clearing Paper Jams Pull the jammed paper out of the multi purpose tray. Push up button ‘A’ of paper remaining inside the printer. Close the front cover. Paper Jams in the Paper Tray Follow the procedure below to remove paper jammed in the paper tray.
  • Page 103 Remove all the jammed and/or creased paper from the tray. If there is jammed paper remaining inside the printer, pull it out carefully to avoid tearing GCC Elite Color 16 Series User’s Guide 4-5 Clearing Paper Jams...
  • Page 104 Push up button ‘A’ of paper remaining inside the printer. Close the front cover. Hold the paper tray with both hands, align it with the opening in the printer and gently insert it. Push the paper tray completely back into the printer.

  • Page 105: Paper Jams Between The Drum Cartridge And Fuser Unit

    Push up button ‘A’ and fully open the front cover Remove the jammed paper. If the paper is torn, remove any scraps of paper remaining inside the printer. Close the front cover. GCC Elite Color 16 Series User’s Guide 4-7...
  • Page 106 GCC Elite Color 16 Series User’s Guide Clearing Paper Jams Paper jams in the fuser unit: Follow the procedure below to remove paper jammed in the fuser unit. Press button ‘B’ Lift the levers at both ends of the fuser unit, and remove the jammed paper. If the paper is torn, remove any scraps of paper remaining inside the printer.

  • Page 107: Paper Jams In The Paper Rotator

    If paper longer than 14 inches (355.6 mm) becomes jammed in the printer, cut the paper as nec- essary and remove the paper from the location where it is jammed using the appropriate proce- dure. If the front cover is difficult to open, do not force it. Turn off the printer immediately and contact your...

  • Page 108: Paper Jams In The High Capacity Feeder (Trays 3/4)

    Clearing Paper Jams Press button ‘B’ Remove the jammed paper. If the paper is torn, remove any scraps of paper remaining inside the printer. Close the front cover. Paper Jams in the High Capacity Feeder Follow the procedure below to remove paper jammed in the High Capacity Feeder.
  • Page 109 Paper in the High Capacity Feeder feeds to the printer from the front of the trays, therefore paper jammed in the lower tray can block the upper tray of the module or the paper tray in the printer, preventing you from opening them. Look for the jammed paper sequentially, starting with the lowest tray.
  • Page 110 4-12 GCC Elite Color 16 Series User’s Guide Clearing Paper Jams Close the front cover. Close all open paper trays.

  • Page 111: Consumables

    “About this Chapter“ on page 5-2 • “Consumables Overview“ on page 5-2 • “Toner Cartridges“ on page 5-4 • “Drum Cartridge“ on page 5-8 • “Transfer Roller Cartridge“ on page 5-13 • “Fuser Unit“ on page 5-16 • “Paper Feed Roller“ on page 5-21...

  • Page 112: Consumables Overview

    At this stage, confirm that you have a replacement toner cartridge available. Replace toner cartridges as soon as the message prompt- ing you to do so appears. The printer stops operating if you do not replace the toner cartridge when required.

  • Page 113: Transfer Roller Cartridge

    However, this figure varies depending on the content of the material printed, as well as the size and type of paper used. Replace the transfer roller cartridge as soon as the message prompting you to do so appears. The printer stops operating if you do not replace the transfer roller car- tridge when required.

  • Page 114: Paper Feed Roller

    Toner Cartridges Paper Feed Roller The paper feed roller feeds paper from the paper tray into the printer. Usually, the paper feed roller needs to be replaced after printing about 100,000 sheets. However, this figure varies depending on the size and type of paper used. When the paper feed roller deteriorates, paper may not feed correctly from the paper tray, resulting in paper jams.

  • Page 115: Replacing Toner Cartridges

    Avoid storing near magnetic objects such as CRT screens, disk drives, or floppy disks. • Keep out of reach of children. Replacing Toner Cartridges Follow the procedure below to replace toner cartridges. GCC Elite Color 16 Series User’s Guide 5-5 Toner Cartridges...
  • Page 116 GCC Elite Color 16 Series User’s Guide Toner Cartridges Remove the top cover. Grip the levers at the ends of the toner cartridge that you want to replace and rotate them Pull out the toner cartridge. NOTE: Put the toner cartridge on a piece of paper to prevent toner from staining the floor or furniture.
  • Page 117 Shake the toner cartridge 7 or 8 times as illustrated to distribute the toner evenly. Align the toner cartridge with the corresponding insertion point in the printer and insert it as illustrated. Grip the levers at each end of the toner cartridge with your fingers and them push down lightly to rotate the levers forward.

  • Page 118: Drum Cartridge

    5% color coverage) with a 1:1 color/monochrome ratio. CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cord from the AC outlet before cleaning the printer or performing maintenance.

  • Page 119: Replacing The Drum Cartridge

    • Avoid removing the drum cartridge from the printer before it is time to replace it. Remov- ing and replacing the drum cartridge can cause dirt to stick to the cartridge and deteriorate print quality.
  • Page 120 GCC Elite Color 16 Series User’s Guide Drum Cartridge Push up button ‘A’ Open the paper outlet cover. Grip the handle on top of the drum cartridge and gently lift it out of the printer. and fully open the front cover...
  • Page 121 Pull the seals completely out. NOTE: Keep the aluminum package of the drum cartridge in case you need to transport the printer over long distances in the future. Hold the left and right sides of the drum cartridge and remove the protective cover from GCC Elite Color 16 Series User’s Guide 5-11...
  • Page 122 NOTE: Do not touch the transfer roller. Lowering the cartridge into the printer without correctly aligning the shafts with the slots can damage the cartridge. Do not allow the surface of the transfer roller to come into contact with anything.

  • Page 123: Transfer Roller Cartridge

    WARNING: Never throw used transfer roller cartridges into a fire. The residual toner could explode, resulting in burns. CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cord from the AC outlet before cleaning the printer or performing maintenance.

  • Page 124: Replacing The Transfer Roller Cartridge

    • Do not remove the transfer roller from the printer before it is time to replace it, as toner may spill inside the printer and cause damage. Replacing the Transfer Roller Cartridge...
  • Page 125 Unpack a new transfer roller cartridge and insert the stubs on both ends of the transfer roller cartridge into the U-shaped guides inside the printer. To lock the transfer roller cartridge into the printer, push down on the base of the tabs until you hear a click.

  • Page 126: Fuser Unit

    AC outlet before cleaning the printer or performing maintenance. Replacing the Fuser Unit Follow the procedure below to replace the fuser unit. NOTE: To allow the fuser unit to cool down, turn the printer off for at least 30 minutes before replacing the fuser unit.
  • Page 127 Push up button ‘A’ and fully open the front cover Open the paper outlet cover. GCC Elite Color 16 Series User’s Guide 5-17 Fuser Unit...
  • Page 128 5-18 GCC Elite Color 16 Series User’s Guide Fuser Unit Close the front cover. Press button ‘B’ Move the slide switches at both ends of the fuser unit forward. and open the upper part of the front cover...
  • Page 129 Grip the levers and gently lift the fuser unit out of the printer. Unpack a new fuser unit, lift up the levers at both ends levers, align it with the slots in the printer, and slowly push it in GCC Elite Color 16 Series User’s Guide 5-19...
  • Page 130 5-20 GCC Elite Color 16 Series User’s Guide Fuser Unit Completely push down the levers at both ends of the fuser unit. Move the slide switches at both ends of the fuser unit all the way to the back. Close the paper outlet cover.

  • Page 131: Paper Feed Roller

    Paper Feed Roller This section describes the procedure for replacing the paper feed roller. CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cord from the AC outlet before cleaning the printer or performing maintenance procedures.
  • Page 132 Pull the paper tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and remove it from the printer. Push the tabs of the paper feed roller cover to open the cover.
  • Page 133 Align the new paper feed roller axis with the shaft in the paper tray as illustrated and slide the shaft through the roller until the clip locks into the groove at the end of the shaft. GCC Elite Color 16 Series User’s Guide 5-23 Paper Feed Roller...
  • Page 134 GCC Elite Color 16 Series User’s Guide Paper Feed Roller Close the paper feed roller cover. Hold the paper tray with both hands, align it with the opening in the printer and gently insert it. Push the paper tray completely back into the printer.
  • Page 135 GCC Elite Color 16 Series User’s Guide 5-25 Paper Feed Roller NOTE: Do not use excessive force on the paper tray.

  • Page 136: Options

    Options In this Chapter . . . • “About this Chapter” on page 6-2 • “Options Overview” on page 6-2 • “High Capacity Feeder” on page 6-2...

  • Page 137: Options Overview

    This chapter describes any available options and the procedures for their installation and removal. Options Overview The following optional accessories are available with this printer. To order any of the options, contact your GCC dealer. High Capacity Feeder This option allows you to attach an additional 2 trays to the printer.

  • Page 138: Installing The High Capacity Feeder

    Gently pull out the upper tray of the High Capacity Feeder until it stops. Hold the tray with both hands, lift up the front slightly and remove it from the High Capacity Feeder. GCC Elite Color 16 Series User’s Guide 6-3 High Capacity Feeder...
  • Page 139 Remove the tape from the cardboard spacer in the tray and remove the spacer. NOTE: Keep the spacer in case you need to transport the printer over long distances in the future. Remove the lower tray from the High Capacity Feeder and remove the cardboard spacer...
  • Page 140 To lift the printer, face the front and back of the printer and grip the recessed areas at the bot- tom left and right with both hands. Never try to lift the printer by gripping any other areas. Lift- ing the printer by gripping other areas can cause the printer to fall, resulting in injury.
  • Page 141 High Capacity Feeder NOTE: Be careful not to pinch your fingers when lowering the printer onto the High Capacity Feeder . Pull the printer’s paper tray out until it stops. Hold the tray with both hands, lift the front slightly and remove it from the printer.
  • Page 142 GCC Elite Color 16 Series User’s Guide 6-7 High Capacity Feeder Insert the four screws provided into the four holes inside the printer and tighten them with a coin to secure the printer to the High Capacity Feeder. NOTE: Make sure the screws are firmly tightened.
  • Page 143 Insert the High Capacity Feeder’s lower paper tray in to the High Capacity Feeder. Push the paper tray until it stops. NOTE: Do not use excessive force on the paper tray. Replace the High Capacity Feeder’s upper paper tray and the printer’s paper tray in the same manner.

  • Page 144: Removing The High Capacity Feeder

    Bend your knees to avoid back injury when lifting the High Capacity Feeder. Pull the printer’s paper tray out until it stops. Hold the tray with both hands, lift the front slightly and remove it from the printer. GCC Elite Color 16 Series User’s Guide 6-9...
  • Page 145 GCC Elite Color 16 Series User’s Guide High Capacity Feeder Remove the tray cover from the printer. Using a coin, remove the 4 screws inside the printer. Hold the paper tray with both hands, align it with the opening in the printer and gently insert it.
  • Page 146 Do not use excessive force on the paper tray. Replace the printer’s tray cover. Gently lift the printer off the High Capacity Feeder, and place it on a level surface. GCC Elite Color 16 Series User’s Guide 6-11 High Capacity Feeder...
  • Page 147 To lift the printer, face the front and back of the printer and grip the recessed areas at the bot- tom left and right with both hands. Never try to lift the printer by gripping any other areas. Lift- ing the printer by gripping other areas can cause the printer to fall, resulting in injury.

  • Page 148: Understanding And Navigating The Control Panel Menus

    Understanding and Navigating the Control Panel Menus In this Chapter . . . • “About this Chapter” on page 7-2 • “Control Panel Features” on page 7-2 • “Navigating the Control Panel Menus” on page 7-5 • “Menu Structure” on page 7-7 •...

  • Page 149: Control Panel Features

    Control Panel Features The control panel is located on the front of the printer, and contains the display, indicators, and pushbuttons that allow you to view and change the printer settings. The figure below shows the control panel features.

  • Page 150: Led Indicators

    LED Indicators The LED indicators also indicate printer status. The four indicators can each be on, off, or blinking, indicating different phases of printer operation. The table below explains the LED indicators. COLOR Green READY Green ACTIVE FAULT POWER POWER SAVER GCC Elite Color 16 Series User’s Guide 7-3...

  • Page 151: Pushbuttons

    Pushbuttons The control panel pushbuttons allow you to access and navigate menus, and also assist you in recovering from printer errors. The table below explains the functions of the eight pushbuttons. PUSHBUTTON START/STOP—Push this button to start or stop the printer, or to exit the menu system.

  • Page 152: Navigating The Control Panel Menus

    Navigating the Control Panel Menus When you press the MENU button on the control panel, you enter the printer’s menu system. At that point, the first line of the display contains the text “ Menu ”, indicating that you are in the menu system.
  • Page 153 GCC Elite Color 16 Series User’s Guide Navigating the Control Panel Menus The following figure shows the sequence of pushbuttons and display messages that would allow you to change the number of copies printed. This example illustrates the basic relationship between menus and submenus and demonstrates how the NEXT, PREVIOUS , SELECT , and RETURN buttons help you to navigate through the menus.

  • Page 154: Menu Structure

    Jam Recovery Hex Print Toner Out Intellifilter (*) NOTE: (*) Please consult GCC Technical Support for information on use of this feature. GCC Elite Color 16 Series User’s Guide 7-7 PS Menu Interface Menu Print PS Errors Port Manual Feed TO...
  • Page 155 Additional menus and submenus may appear in the printer menu system when other options are installed. Status Menu In addition to the main menus listed above, the printer also provides a status menu that allows you to view the current printer settings. Push the STATUS button to enter the Status Menu. Status...

  • Page 156: Paper Menu

    Tray 1 Tray 2 Tray 3 (optional) Tray 4 (optional) Manual Feed GCC Elite Color 16 Series User’s Guide 7-9 Paper Menu Description This submenu allows you to change the number of copies printed. This submenu allows you to turn the duplex print function on or off.
  • Page 157 7-10 GCC Elite Color 16 Series User’s Guide Paper Menu Submenus AvailableSettings (Bold is Default) Media Size/Type Size Tray 1: A4 , US Letter , JIS B5, Statement, A5, A6, C5 Envelope, DL Envelope, Com10 Envelope, Monarch Envelope, US Executive, US Legal, US Legal 13”...

  • Page 158: Interface Menu

    Interface Menu The Interface Menu provides access to the printer interface settings. Use the following proce- dure to enter the interface menu: Press the MENU button on the control panel. Press the NEXT button until the text “Interface Menu” is shown on the second line of the display.
  • Page 159 7-12 GCC Elite Color 16 Series User’s Guide Interface Menu Submenus Available Settings (Bold is Default) Network 1 Setup Interpreter: Auto Switch PostScript 3 Format: Normal Binary Network Channel: Netware On DEC LAT On AppleTalk On TCP/IP On Network Address:...
  • Page 160 Auto Switch PostScript 3 Format: Normal Binary Delay Out Close: GCC Elite Color 16 Series User’s Guide 7-13 Interface Menu Description This submenu allows you to set up the USB interface. Interpreter determines whether the USB port will accept only PCL jobs, only PostScript jobs, or both (Auto Switch).

  • Page 161: Ps Menu

    7-14 GCC Elite Color 16 Series User’s Guide PS Menu PS Menu The PS Menu provides access to the PostScript settings. Use the following procedure to enter the PS Menu: Press the MENU button on the control panel. Press the NEXT button until the text “PS Menu” is shown on the second line of the display.

  • Page 162: Pcl Menu

    Internal Font Number Numbers 0-53 (12) Pitch 0.08 - 100.00 (10.00) GCC Elite Color 16 Series User’s Guide 7-15 PCL Menu Description This submenu allows you to choose the orientation of the page. This submenu allows you to choose a font source.
  • Page 163 7-16 GCC Elite Color 16 Series User’s Guide PCL Menu Submenus Available Settings (Bold is Default) Symbol Set 10U:PC-8 CP437 11U:PC-8 D/N 12U:PC-850 17U:PC-852 9T:PC-Turkish 19U:WIN Latin1 9E:WIN Latin2 5T:WIN Latin5 7J:Desk Top 10J:PS Text 13J:Ventura Intl 14J:Ventura US 6J:Microsoft Pub...
  • Page 164 Tray 4 (= 0005 - optional tray) Auto-Select (= 0007) GCC Elite Color 16 Series User’s Guide 7-17 Description This submenu allows you to set the print area. Paper Size: This submenu allows you to set the default paper source and US Executive (= paper size parameters.

  • Page 165: System Menu

    7-18 GCC Elite Color 16 Series User’s Guide System Menu System Menu The system menu provides access to system settings. Use the following procedure to enter the system menu: Press the MENU button on the control panel. Press the NEXT button until the text “System Menu” is shown on the second line of the display.
  • Page 166 Submenus Toner Out Intellifilter GCC Elite Color 16 Series User’s Guide 7-19 Available Settings (Bold is Description Default) Stop This submenu allows you to specify whether the Continue printer should stop or continue when out of toner.. This submenu allows to turn the Intellifilter feature on or off.

  • Page 167: Quality Menu

    GCC Elite Color 16 Series User’s Guide Quality Menu Quality Menu The Quality Menu provides access to the printer settings that are related to print quality. Use the following procedure to enter the Quality Menu: Press the MENU button on the control panel.

  • Page 168: Color Menu

    Use the NEXT or PREVIOUS buttons to scroll through the available settings, then press the SELECT button to save the setting. Submenus Screening Mode Rendering Intent GCC Elite Color 16 Series User’s Guide 7-21 Available Settings (Bold is Description Default) Enhanced...
  • Page 169 7-22 GCC Elite Color 16 Series User’s Guide Color Menu Submenus Available Settings (Bold is Default) Color Matching Alignment Alignment Page K-V Adjust: M-V Adjust (600) M-V Adjust (1200) Y-V Adjust (600) Y-V Adjust (1200) C-V Adjust (600) C-V Adjust (1200)

  • Page 170: Functions Menu

    Functions Menu The Functions Menu provides access to several printer functions that can supply you with infor- mation about the printer and its settings. Use the following procedure to enter the Functions Menu: Press the MENU button on the control panel.

  • Page 171: Installing Additional Memory

    Installing Additional Memory In this Chapter . . . • “About this Chapter” on page 8-2 • “Installing DRAM Memory DIMMS” on page 8-2...

  • Page 172: Installing Dram Memory Dimms

    This chapter describes the procedures for installation of additional memory. The printer uses 168-pin, PC133 DRAM memory DIMMs . Installing DRAM Memory DIMMS Ensure that the printer power switch is set to the OFF [ O ] position. Disconnect the power cord from the wall outlet.
  • Page 173 Turn thumbscrews on controller assembly counterclockwise until loose and gently pull controller assembly towards you to remove from printer. Carefully insert a DRAM DIMM which is compatible with your printer into any available DRAM DIMM slot as shown below. When properly seated, gently push down on the DIMM until the white braces close and snap onto the ends of the DIMM.
  • Page 174 GCC Elite Color 16 Series User’s Guide Installing DRAM Memory DIMMS Reinstall the controller assembly. Once firmly in place, push and hand tighten the thumb- screws in a clockwise direction. Connect the power cord to the wall outlet. Turn the printer power switch to the ON [ I ] position.
  • Page 175 GCC Elite Color 16 Series User’s Guide 8-5 Installing DRAM Memory DIMMS NOTE: To remove the DRAM DIMM, pull the white braces away from the ends of the DIMM until the DIMM snaps out of the slot.

  • Page 176: Appendix A General Information

    General Information In this Chapter . . . • “About this Appendix” on page A-2 • “Sources of Support” on page A-2 • “GCC Worldwide Offices” on page A-3 • “GCC Part Numbers” on page A-4...

  • Page 177: Sources Of Support

    Your GCC Vendor The local vendor that you purchased the printer through may be best equipped to help you with printer problems. Your vendor has specially trained service technicians available to answer questions, and also has equipment that is necessary to analyze printer problems.

  • Page 178: Gcc Service

    If you have a hardware problem you cannot resolve, contact GCC Technical Support at (781) 276-8620. GCC Sales Printers and printer suppies can be purchased through GCC Direct Sales at 800 422-7777 (U.S./ Canada) or by visiting www.gccprinters.com. GCC Worldwide Offices...

  • Page 179: Gcc Part Numbers

    GCC Elite Color 16 Series User’s Guide GCC Part Numbers GCC Part Numbers Below is a lists of part numbers for the GCC Elite Color 16 printer, options, and consumables. To order parts, contact your local authorized GCC dealer. Printers...

  • Page 180: Appendix B Safety Notes And Regulatory Compliance

    Safety Notes and Regulatory Compliance In this Chapter . . . • “About this Appendix” on page B-2 • “Safety Notes” on page B-2 • “Regulatory Compliance” on page B-2...

  • Page 181: Safety Notes

    Safety Notes • Be sure to switch off and unplug the printer before accessing the interior of the printer for cleaning, maintenance, or fault clearance. Accessing the interior of a live machine exposes you to the risk of electric shock.

  • Page 182: Emc Compliance

    AS/NZS 3548:1995 including A1:1997 and A2:1997 • EN55022: 1994 including A1:1995 and A2:1997 • FCC Part 15, Subpart B (CFR 47, 1995) • CISPR22: 1993 including A1:1995 and A2:1996 GCC Elite Color 16 Series User’s Guide B - 3 Regulatory Compliance...

  • Page 183: Printing Font Summaries

    Printing Font Summaries In this Chapter . . . • “About this Appendix” on page C-2 • “Printing a Font Summary” on page C-2 • “PostScript Font Summary” on page C-3 • “PCL Font Summary” on page C-7...

  • Page 184: Printing A Font Summary

    Printing a Font Summary Your printer has the capability of printing summaries of all installed PCL or PostScript fonts. To print a Font Summary, follow these steps: From the Ready status, press MENU, the control panel display will read:...

  • Page 185: Postscript Font Summary

    GCC Elite Color 16 Series User’s Guide C-3 PostScript Font Summary PostScript Font Summary...
  • Page 186 GCC Elite Color 16 Series User’s Guide PostScript Font Summary (cont’d) PostScript Font Summary (cont’d)
  • Page 187 GCC Elite Color 16 Series User’s Guide C-5 PostScript Font Summary (cont’d) PostScript Font Summary (cont’d)
  • Page 188 GCC Elite Color 16 Series User’s Guide PostScript Font Summary (cont’d) PostScript Font Summary (cont’d)

  • Page 189: Pcl Font Summary

    GCC Elite Color 16 Series User’s Guide C-7 PostScript Font Summary (cont’d) PCL Font Summary...
  • Page 190 GCC Elite Color 16 Series User’s Guide PCL Font Summary (cont’d) PCL Font Summary (cont’d)

  • Page 191: Notes On Matching Printed Colors With Display Colors

    Notes on Matching Printed Colors with Display Colors In this Chapter . . .

  • Page 192: Printed Colors Vs. Display Colors

    Printed Colors vs. Display Colors About this Appendix Printed Colors vs. Display Colors Options for Color Matching Option 1 — Select a color that is closest to the result you want in both medias Step 1: Step 2: Option 2 — Produce two versions of your work...
  • Page 193 Options for Color Matching Step 1: Step 2:...

  • Page 194: Warramties And Licenses

    Warranties and Licenses In this Chapter . . . “About this Appendix” on page E-2 • “Software License Agreement” on page E-2 • “Limited Hardware/Software Warranty” on page E-3 •...
  • Page 195 3. Transfer the Software to another party, if the other party agrees to the terms and conditions of this License Agreement and registers the soft- ware with GCC. A Registration application is included with the GCC printer software, allowing registration to be done electronically or by mail.

  • Page 196: Limited Hardware/Software Warranty

    Warranty Duration: One (1) Year, return to GCC or authorized representative 1. GCC Technologies, Inc. (“GCC”) warrants, for the limited period of one (1) year from the date of original purchase, the Elite Color 16 Series Laser Printer, accessories and supplies (the “Product”) to be free from defects in materials and workmanship. If such defects are reported to GCC during the warranty period, GCC or its authorized representative will, at its option, repair, replace or refund the purchase price of any defective product at no additional cost.

This manual is also suitable for:

Elite color 16 seriesElite color 16dn

Table of Contents