GCC Technologies T500 User Manual page 103

File Edit Vector Page
The File Edit Vector Page allows you to edit the vector pen, vector power, vector speed, and vector
PPI, and power ramp settings for the selected job. These settings correspond to the same settings
found on the LaserPro T500 print driver. This page allows you to easily adjust these values to make
immediate adjustments while processing your loaded jobs, even when you have disconnected your
computer from the LaserPro T500.

Vector Pen: 1 - 16

Vector Power: 0.0% - 100%

Vector Speed: 0.0% 100%

Vector PPI: 30 - 1524

Power Ramp: YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
☼ Navigating to this page:
File Management Page
File Management Edit Page
File Edit Vector Page
Back to previous page
Save your current settings
103
Main Work Page
Press F4
Functions Page
Select <File Management>
from the menu
Select a job file and
press Enter
File Information Page
Press F4
Select <Vector Setting>
from the menu
File Edit Vector Page
Function
232002080G(09)