GCC Technologies T500 User Manual page 121

Advanced Option- AAS Calibration Page
After optional AAS (Accu-Align System) contour cutting hardware installation, please enter
the function menu of control panel to perform AAS Calibration before using AAS to do
contour cutting job. The AAS Calibration function will fine tune the offset value between
AAS and the lens carriage with auto and manual modes options. The <manual calibration>
is designed for application requested for more precise offset value. <Threshold > adjustment
will help to increase the recognition rate when AAS reading marks is failed. For black marks
printed on white substrate, the higher the threshold value, the higher recognition rate the
AAS can read the marks; while print white marks on dark substrate, smaller threshold value
is suggested. The AAS Power Adjustment allows changing laser output parameters when
doing AAS calibration. Follow the user manual comes along with the AAS hardware for
detailed operation.
•
Threshold: 1-99 (Default 50)
•
Raster Speed: 0-100%
•
Raster Power: 0-100%
121
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Advanced
Options>from menu
Advanced Option Page
Select<AAS
Calibration> from menu
Select<SmartGUARD>
from the menu
AAS Calibration Page
Select<SmartGUARD>
from the menu
232002080G(09)