GCC Technologies T500 User Manual page 68

NOTE
• USB storage function only supported for the PRN format, you can convert the file to
PRN format from the GCC LaserPro printer driver.
Step 8. Navigate the control panel through <F4> Function <File Management> <USB Drive File>
Step 9. Choose the file and press Enter button from control panel to transmit the file to laser engraver.
Step 10. Press START button on control panel to begin laser jobs.
NOTE
• File cannot be write to laser machine, please do not remove the USB flash drive if you
want to keep process the job.
68 232002080G(09)