Check Cartridge, Invalid Print Cartridge, Non-Xerox Cartridge, Replace Print Cartridge - Xerox Phaser 3600 Service Manual

Error Messages
Check Cartridge, Invalid Print Cartridge, Non-Xerox Cartridge, Replace Print
Cartridge
3-18
Troubleshooting Reference Table
Applicable Parts
Print Cartridge, PL1.1.34
Toner Sensor Board, PL1.3.47.2
Main Board, PL1.1.19
Step Action and Questions
1. Open the top cover and ensure
that the Print Cartridge is properly
seated.
Does the error clear after
reseating the cartridge?
2. Check the Print Cartridge for
damage.
Does the cartridge contain toner
and appear to be operating
properly?
3. Reseat all harness connections to
the Toner Sensor (CRUM) Board.
Does the error clear?
4. Check continuity between the
Toner Sensor (CRUM) Board and
CN7 on the Main Board.
Wiring and Plug/Jack Map References
"Map 2- Main Board" on page 9-5
"Main Drive/Joint Board and Optional
Tray Wiring Diagram" on page 9-15
Yes No
Complete Go to Step 2.
Go to Step 3. Replace Print
Cartridge.
Complete Go to Step 4.
Replace the Toner Replace the Main
Sensor Board Board (page 7-39).
(page 7-24).
Phaser 3600 Printer Service Manual