Remove The Irrigation Pump Gear Motor - Integra Cusa Excel Service Manual

Figure 11-31.
Disconnecting the irrigation pump
gear motor from the control card
CUSA EXcel Ultrasonic Surgical Aspirator System Service Manual

Remove the Irrigation Pump Gear Motor

Removing the gear motor requires removing the left side cover and the irrigation
pump bezel, but not the pump head.
Remove the four screws and four lock washers (M5 Phillips) that hold the
1.
panel to the console.
Pull the panel forward and lay it on top of the console. It is not necessary to
2.
remove the suction pinch valve or the irrigation pump head.
Remove the four hex nuts (M4), four washers (M4), and four lock washers
3.
(M4) from the motor control card bracket.
Pull the control card bracket far enough from the frame to disconnect the
4.
irrigation gear motor from the control card. Refer to Figure 11-31.
2
7
IRRIGATION PUMP
A
B
+24V
C
Irrigation Pump Head and Gear Motor
IRRIGATION CONTROL CARD
HP COOLING CONTROL CARD
2
R21 J1
R2
J2
R4
PCOM +24V
R21
J1
R2
PCOM
R4
J2
8
COOLING PUMP
11-43