Figure 11-10.
Disconnecting the 50-pin ribbon cable
and removing the Machine Control
PCB
Figure 11-11.
Removing the Display PCB from the
control head assembly
CUSA EXcel Ultrasonic Surgical Aspirator System Service Manual
Control panel
overlay
Control panel
bezel
Display PCB
Chassis
Install the Display PCB
Attach the display PCB to its chassis:
1.
Position the display PCB onto the chassis.
a.
Replace the eight screws (M4 Phillips) in the display PCB.
b.
Being careful to make sure the silicon buttons clear the bezel, position the
2.
display PCB and chassis in the control panel bezel.
Control Head Components
Machine
Control PCB
Machine
Control PCB
11-19