Integra Cusa Excel Service Manual page 15

xiv
Figure 11-16. Pulling the strain relief bushing away from the manifold bracket
Figure 11-17. Removing the manifold bracket from the console
Figure 11-18. Removing the suction control valve from the manifold bracket
26
Figure 11-19. Removing the suction hose and clamp from the suction control
valve
11-27
Figure 11-20. Removing the suction tube and clamp from the "T" fitting
Figure 11-21. Pulling the split bushing away from the manifold bracket
Figure 11-22. Disconnecting cables from the suction pump to the suction pump
controller card
Figure 11-23. Removing the suction tube and strain relief bushing from the
suction pump and its wires
Figure 11-24. Removing the suction pump from its bracket mount
Figure 11-25. Attaching the suction pump motor to its mounting bracket, making
sure to center the pump on the bracket
Figure 11-26. Removing the cable clamps and screws from the suction pump
controller card
Figure 11-27. Removing the irrigation pump bezel
Figure 11-28. Removing the suction pinch valve
Figure 11-29. Removing the irrigation pump bezel
Figure 11-30. Removing the irrigation pump head
Figure 11-31. Disconnecting the irrigation pump gear motor from the control card
11-43
Figure 11-32. Replacing the gear motor/pump head coupler on the motor drive
shaft
11-44
Figure 11-33. Replacing the handpiece flow sensor
Figure 11-34. Removing the end bell and tubing from the cooling water pump
head
11-50
Figure 11-35. O-rings on cooling water reservoir connectors
CUSA EXcel Ultrasonic Surgical Aspirator System Service Manual
11-31
11-33
11-34
11-36
11-39
11-39
11-41
11-42
11-47
11-25
11-25
11-
11-30
11-30
11-33
11-51