Integra Cusa Excel Service Manual page 165

Suction Pump and Controller Card
Figure 11-20.
Removing the suction tube and
clamp from the "T" fitting
Figure 11-21.
Pulling the split bushing away from
the manifold bracket
11-30
Disconnect and Remove the Suction Pump
Remove the 3/8 in. ID suction tube and clamp from the "T" fitting at the back
1.
of the contamination guard.
Pull the split bushing restraint on the suction tube away from the manifold
2.
bracket (near the right end of the bracket).
CUSA EXcel Ultrasonic Surgical Aspirator System Service Manual