Setting Parameters On The Vcn Webui - Huawei FusionModule5000 Commissioning Manual

FusionModule5000 Smart Modular Data Center
Commissioning Guide
Condition
Coding Resolution
protocol
H.264 1080P
H.265 720P
H.264 720P
H.265 720P
H.264 720P
----End

6.6.5.4 Setting Parameters on the VCN WebUI

Prerequisites
For details about the VCN hardware description and installation, see the "Hardware Guide" in
the corresponding VCN product documentation. For details about the VCN configuration, see
Configuration Guide.
Context
A default IP address has been configured for the VCN before delivery. Modify the IP address
based on the actual network plan.
Procedure
Step 1 Modify the IP address for the VCN.
1.
2.
Issue 06 (2020-03-20)
Frame rate
25
25
25
25
25
The version number is subject to the Quick Start delivered with the VCN. The description and link in
this document are for reference only.
Configure the PC IP address and the VCN IP address in the same network segment.
Enter the OMU Portal address (the default address for VCN is
https://192.168.1.100:8443; the default address for VCN540 is
https://192.168.2.101:8443) in the address bar of the Internet Explorer and press the
Enter button.
The OMU Portal supports Internet Explorer 8.0 and later versions.
On the login page, enter the user name Admin and preset password Change_Me, and
click Log In to enter the OMU Portal page.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning the Management System
Result
I-frame Minimum
interval required bit
rate
50 1M
50 0.8M
50 1M
50 0.6M
50 0.8M
Supported
video storage
duration (h)
66
75
66
105
75
92