Commissioning Ipc6325 Camera (Sd Card Configured) - Huawei FusionModule5000 Commissioning Manual

FusionModule5000 Smart Modular Data Center
Commissioning Guide
----End
Follow-up Procedure
Commission the other cameras by referring to this section.

6.6.5.2.2 Commissioning IPC6325 Camera (SD Card Configured)

Context
If the VCN is not configured and an SD card is chosen, perform the following procedure.
Procedure
Step 1 Log in to the Huawei IPC WebUI.
Step 2 Format the SD card.
1.
2.
Step 3 Set the camera stream type and primary stream parameters. Path: Settings >
Video/Audio/Image > Video Settings.
Issue 06 (2020-03-20)
Figure 6-29 Setting secondary stream 1 parameters
Choose Settings > System Configuration > Storage Management.
The Storage Management page is displayed. Format the SD card.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning the Management System
86