Huawei FusionModule5000 Commissioning Manual page 103

FusionModule5000 Smart Modular Data Center
Commissioning Guide
Item
Mount Server
3.
4.
5.
6.
Step 3 Configuring a Video Recording Plan.
1.
2.
3.
4.
5.
6.
Step 4 Create a user.
When connecting to the VCN on the NetEco, you need to log in to the VCN as a non-admin
user.
1.
2.
Issue 06 (2020-03-20)
There are multiple VCNs for multiple smart modules, you are advised to evenly distribute the cameras to
each VCN.
Click Search, in each camera record, enter the user name and password in the text boxes
and click Verify. If the camera is verified successfully, select cameras to add and click
Next.
Preview live video images, click the camera in the camera list on the left, and adjust
camera parameters to optimize the image effect. Then click Next.
(Optional) Group the cameras and click Next after grouping.
Click Finish to finish adding a camera.
In the Quick Setup area on the VCN IVS home page, double-click Server Recording
Plan.
Select the camera on the Cameras list and click Next.
(Optional) Set recording parameters, and click Next.
Set recording plan parameters in the Time settings. Drag the timeline to select the time
segment for implementing video recording.
If you set the recording plan policy is to All, you do not need to set the recording plan time.
Click Next to complete the recording plan setting. When
the recording plan has been set successfully.
Click Finish.
Log in to the VCN IVS as user Admin.
If the VCN software version is V100R003 or later, the default user name is admin.
If the VCN software version is V100R002 or earlier, the default user name is Admin.
On the VCN IVS home page, double-click Add User, create a user, and click Next. The
Assign Rights page is displayed.
When creating a user, you can select Enable account validity period and set Valid from and Valid to
to set the account validity period for the created user.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning the Management System
Value
access
Select the server that cameras need to access
is displayed in the status bar,
96