Setting Parameters On The Vcn Webui - Huawei FusionModule800 Installation Manual

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)

6.3.10.3 Setting Parameters on the VCN WebUI

Prerequisites
For details about the VCN hardware description and installation, see the "Hardware Guide" in
the corresponding VCN product documentation. For details about the VCN configuration, see
Configuration Guide.
Context
A default IP address has been configured for the VCN before delivery. Modify the IP address
based on the actual network plan.
Procedure
Step 1 Modify the IP address for the VCN.
1.
2.
3.
Issue 10 (2019-12-20)
The version number is subject to the Quick Start delivered with the VCN. The description and link in
this document are for reference only.
Configure the PC IP address and the VCN IP address in the same network segment.
Enter the OMU Portal address (the default address for VCN is
https://192.168.1.100:8443; the default address for VCN540 is
https://192.168.2.101:8443) in the address bar of the Internet Explorer and press the
Enter button.
The OMU Portal supports Internet Explorer 8.0 and later versions.
On the login page, enter the user name Admin and preset password Change_Me, and
click Log In to enter the OMU Portal page.
After the first login, change the password in time to ensure account security and prevent unauthorized
network attacks, such as data tampering. Huawei will not be liable for any security issues caused by your
failure to change the preset password in time or password loss after changing.
Choose Local Configuration > Server configuration. Set the service IP address
(internal IP address of the VCN), NAT IP address (external IP address of the VCN), time
zone, and time according to the site requirements.
Figure 6-19 Configuring the server
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
261