Huawei FusionModule5000 Commissioning Manual page 52

FusionModule5000 Smart Modular Data Center
Commissioning Guide
Step 5 Tap Password on the home screen of the ACC and enter the generated startup password in
the displayed dialog box.
----End
Online Boot
Step 1 Insert the WiFi module to the USB port on the ACC.
Step 2 Choose Settings > Comm Settings > WIFI Settings on the home screen of the ACC. Then
set WiFi parameters and enable the WiFi function.
Step 3 Connect the mobile phone to the smart cooling product WiFi and ensure proper
communications between the mobile phone app and the smart cooling product.
Step 4 Open the Service Expert app.
Step 5 Tap StartUp on the home screen of the app and the screen shown in
Figure 5-12 Login screen
Table 5-8 Parameter description
Parameter
Site
Device Type
Link
Issue 06 (2020-03-20)
 The preset user name is admin, and the preset password is Changeme.

If you change the login password on the smart cooling product LCD, the password for logging in to
the Service Export app will be changed to what you set on the LCD.
Setting Method
Select the site as required.
Select the device type that needs to be connected. Select
NetCol5000-C in this situation.
Enable the connection between the device and the WiFi network.
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the Cooling System
Figure 5-12 is displayed.
45