Optional) Setting Wifi Parameters - Huawei FusionModule5000 Commissioning Manual

FusionModule5000 Smart Modular Data Center
Commissioning Guide
2.
3.
4.

5.6 (Optional) Setting WIFI Parameters

Prerequisites
After connecting the WIFI module of the USB interface to the USB port of the smart cooling
product display, WIFI Settings is enabled to be set.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Step 2 Set the parameters by referring to
Table 5-7 WiFi settings
Parameter
WiFi SSID
WiFi Password
Enable WiFi
Step 3 Tap Submit.
----End
Issue 06 (2020-03-20)
If no, check the cable connection and the settings of teamwork control parameters.
−
Check whether the number of active devices on the topology is the same as the actual
device number.
− If yes, go to 3.
− If no, check the cable connection and the settings of teamwork control parameters.
Check whether the number of standby devices on the topology is the same as the actual
device number.
− If yes, go to 4.
− If no, check the cable connection and the settings of teamwork control parameters.
Check whether the number of online devices on the topology is the same as the actual
device number.
If yes, the check is complete.
−
− If no, check the cable connection and the settings of teamwork control parameters.
Setting Method
Set WiFi SSID based on the actual configuration; WiFi SSID is the
name used for the WiFi hotspot over which a mobile phone can
connect to the smart cooling product.
Enter the WiFi password when you use a mobile phone to connect
to the WiFi. When you enable the WiFi function for the first time,
you need to set a password (the WiFi has no preset password).
Enable the WiFi function. The default status is Disable.
Copyright © Huawei Technologies Co., Ltd.
Table 5-7.
5 Commissioning the Cooling System
41