Huawei FusionModule5000 Commissioning Manual page 35

FusionModule5000 Smart Modular Data Center
Commissioning Guide
Menu
System Settings
(visible for
V200R002
version)
Issue 06 (2020-03-20)
Parameter
Number of smart
cooling products in
this group
Number of running
smart cooling products
in this group
Humidifying function
Dehumidifying
function
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the Cooling System
Description Configuration
Principle
the actual control over an FE port.
networking mode.
Otherwise, the
teamwork control
function will be
unavailable.
Number of the Total number of the
smart cooling smart cooling products in
products in this this group.
group (1 to 32 can
be set).
Number of active The host allocates
units in a group. running units by smart
The value ranges cooling product unit
from 1 to address in ascending
Number of smart order, which is from 1 to
cooling products 32. The rest will become
in this group. the standby ones.
The humidifying Enable indicates that the
function can be electric humidifier will
set to Enable, be started when the
Disable, or ambient humidity is
lower than the certain
Enabled when
active power. humidity range of the
humidity set point.
Disable indicates that the
electric humidifier will
not be started. Enabled
when active power
indicates that the electric
humidifier will be started
when the main power is
active and the ambient
humidity is lower than
the certain humidity
range of the humidity set
point.
The Enable indicates that the
dehumidifying dehumidification
function can be function will be enabled
set to Enable, when the ambient
Disable, or humidity exceeds the
certain humidity range of
Enabled when
active power. the humidity set point.
Disable indicates that the
dehumidification
function will not be
enabled. Enabled when
active power indicates
28