Huawei FusionModule5000 Commissioning Manual page 82

FusionModule5000 Smart Modular Data Center
Commissioning Guide
3.
4.
5.
Step 2 Set an alarm for card readers.
Set Logical level configuration for reader removed based on the fingerprint reader
configured for the access control system.
Issue 06 (2020-03-20)
Figure 6-20 Adding access permissions
You can authorize and delete access users in batches.
Click OK to complete the task of adding access management settings.
On the Authorization Operations tab page, click Synchronize to Device, select the
modified access control devices, and click Start Synchronization.
Figure 6-21 Synchronizing access permissions
When Synchronization Status is Synchronized for the related devices, close the
Synchronize Access Permission page.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning the Management System
75