System Networking - Huawei FusionModule5000 Commissioning Manual

FusionModule5000 Smart Modular Data Center
Commissioning Guide
Tools

3.3 System Networking

Figure 3-1 System network diagram
Issue 06 (2020-03-20)
If four or more cameras are deployed in a single smart module or multiple smart modules share one
VCN, connect the signal cable from each camera and VCN to the LAN switch.
Wireless communication is automatically established after the access actuator, skylight actuator, and
multi-functional sensor successfully connect to and communicate with the ECC800 through PoE.
Copyright © Huawei Technologies Co., Ltd.
3 Preparations for Power-On Commissioning
17