Commissioning A Camera (Lan Switch Networking Scenario); Commissioning Ipc6325 Cameras - Huawei FusionModule5000 Commissioning Manual

FusionModule5000 Smart Modular Data Center
Commissioning Guide
----End

6.6.5.3 Commissioning a Camera (LAN Switch Networking Scenario)

If the camera web version is IPC V200R003C00, refer to this topic to commission the camera.

6.6.5.3.1 Commissioning IPC6325 Cameras

Prerequisites
If multiple cameras are accessed, retain the connection of one camera and disconnect
connections from other cameras. After commissioning the connected camera, commission
other cameras in the same way.
Procedure
Step 1 Log in to the camera WebUI.
1.
2.
Step 2 For details about how to commission IP cameras and set parameters for them, see the
documentation delivered with the equipment or obtain the documentation by referring to the
"Preparing Documentation" section.
1.
2.
3.
Set coding protocol to H.265.
Issue 06 (2020-03-20)
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press Enter button.
The following lists the operating system and browser supported for logging in to the camera through the
WebUI.
 Support Windows 7: Internet Explorer 8/9/10/11. Chrome 32+, and FireFox 35–51
 Support Windows 8: Internet Explorer 10/11, Chrome 32+, and FireFox 35–51
 Support Windows 10: Internet Explorer 11, Chrome 32+, and FireFox 35–51

Google Chrome 45 or later versions need to install the Internet Explorer tab plug-in.
 Only 32-bit web browsers are supported.
Enter the preset user name admin and the preset password HuaWei123, and click Log
In.
Preview the site situation in real time and check the camera coverage through videos.
Adjust the lens if necessary.
Choose Settings > Network Configuration > Network Parameters, and set IPv4
address, IPv4 Subnet mask, and IPv4 Gateway address for the camera according to
the site plan.
Choose Settings > Video/Audio/Image > Video Settings, and set IP address, Subnet
mask, and Gateway IP address for the camera according to the site plan.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning the Management System
88