Huawei FusionModule5000 Commissioning Manual page 91

FusionModule5000 Smart Modular Data Center
Commissioning Guide
3.
4.
5.
Step 3 Click Confirm after video information is entered.
Step 4 In the Video information list, click a link address under Link to go to the camera WebUI as
instructed.
Issue 06 (2020-03-20)
Add the camera that has been found to Video Information. Click Add under the Video
Information list, and enter the camera information in the displayed New Video
Information window.
− Name: Enter the camera name (for example, Camera1).
− External IP: Enter the external IP address of the camera (The IP address assigned
by the network administrator prevails).
− Internal IP: Enter the internal IP address, that is, the found camera IP address:
192.168.248.50.
− Video Type: Select the video type based on the customer's device.
− Link: Enter the external IP address of the camera (for example, https://external IP
address of the camera).
Figure 6-27 Adding video information
Select the required camera, and click the link under Link (PC IP address and camera
external IP address should be in the same network segment) to access and log in to the
camera WebUI. Enter the preset user name admin and preset password HuaWei123, and
click Login.
(Optional) Choose Settings > Basic Configuration > Network Parameters, set Way to
obtain IP to Use the following IP address and set an IP address to the planned IP
address for the camera. The IP address should be in the range of 192.168.248.50 to
192.168.248.199.
To perform Step 2.5, return to the ECC800 Video Management page. In the Video Information area,
select the camera added in
box, set Internal IP to the IP address planned in
Copyright © Huawei Technologies Co., Ltd.
Step 2.3 and click Modify. In the displayed New Video Information dialog
Step
6 Commissioning the Management System
2.5, and click Confirm.
84