How To Prepare And Login App - Huawei FusionModule5000 Commissioning Manual

FusionModule5000 Smart Modular Data Center
Commissioning Guide
----End

7.2.2 How to Prepare and Login App

Prerequisites
App operating environment requirements:




Procedure
Step 1 Download and obtain the app installation package using any of the following three methods:
Issue 06 (2020-03-20)
Figure 7-7 Installing a WiFi converter
The WiFi antenna should be installed on the planned position by using the magnet.
The mobile device must run Android 4.0 or later and is not root operation system (the
operating system is not flashed).
The mobile device has sufficient battery reserve.
You have obtained the IP address of the ECC800 as well as the user name and password
used for WebUI login.
A PC with an IP address in the same network segment as that of the ECC800 is prepared,
and the PC has connected to port WAN_1 on the ECC800.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
121