Non-Acquity Devices For Use With The Xevo Tq-S; Software And Data System - Waters Xevo TQ-S Operator's, Overview And Maintenance Manual

For further instruction, see the nanoACQUITY UPLC System Operator's
Guide or Controlling Contamination in LC/MS Systems (part number
715001307). You can find these documents on http://www.waters.com; click
Services and Support > Support.

Non-ACQUITY devices for use with the Xevo TQ-S

The following non-ACQUITY
TQ-S:
• Waters Alliance 2695 separations module
• Waters Alliance 2795 separations module
• Waters 2998 PDA detector
• Waters 2487 UV detector
• Waters 1525µ binary gradient pump + 2777 autosampler
• Spark Holland Symbiosis™

Software and data system

MassLynx software, version 4.1, mass spectrometry software controls the
mass spectrometer. It is a high-performance application that acquires,
analyzes, manages, and distributes ultraviolet (UV), evaporative light
scattering, analog, and mass spectrometry data.
MassLynx software enables these major operations:
• Configuring the system
• Creating LC and MS/MS methods that define operating parameters for a
run
• Using IntelliStart software to automatically tune and mass calibrate the
mass spectrometer
• Running samples
• Monitoring the run
• Acquiring data
• Processing data
• Reviewing data
• Printing data
1-6 Waters Xevo TQ-S Overview
®
LC devices are validated for use with the Xevo