Connecting The Liquid Waste Line - Waters Xevo TQ-S Operator's, Overview And Maintenance Manual

Connecting the liquid waste line

Required materials
• Chemical-resistant, powder-free gloves
• Waste container
To connect the liquid waste line:
1. Place a suitable waste container below the mass spectrometer.
2. Slide a drain line over the barbed fitting of the drain (located at the
bottom, left-hand side of the mass spectrometer).
B-22 External Connections
The waste line and connection can be contaminated with
Warning:
biologically hazardous materials. Always wear chemical-resistant,
powder-free gloves while performing this procedure.
To avoid distorting the drip tray or causing the drain cup
Caution:
to leak, restrain the drain cup when attaching or removing the
waste line.
Drain line
Drain cup
Barbed fitting
TP02684