Pilz PMCtendo DD5 Operating Manual page 8

Introduction
1 Introduction
1.1 Validity of the documentation
This documentation is valid for the product PMCtendo DD5. It is valid until new documenta-
tion is published.
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product PMCtendo DD5.
Please also refer to the following documents from the motion control range:
}
The online help for the commissioning software describes how to set the parameters for
the servo amplifier.
}
The "PMCprimo CAN Networking" manual contains guidelines for networking multiple
PMCprimo control systems and additional CANopen devices.
All these manuals can be found on the supplied CD-ROM: "Motion Control Documentation".
You will need to be conversant with the information in these documents in order to fully un-
derstand this manual.
This operating manual is valid for the following products:
} PMCtendo DD5 from Version 1.4
1.1.1 Retaining the documentation
This documentation is intended for instruction and should be retained for future reference.
1.2 Definition of symbols
Information that is particularly important is identified as follows:
Operating Manual PMCtendo DD5
1002236-EN-04
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.
8