Pilz PMCtendo DD5 Operating Manual page 50

Function description
Incremental encoder ROD (AquadB) 5 V, 350 kHz with Hall (X1)
Functions:
} Incremental encoder ROD (AquadB) with 5 V signal connected as a primary feedback
system.
} Cutoff frequency 350 kHz
}
Temperature monitoring on the motor is connected to X1 and is evaluated there
Setting the parameters:
Encoder type
Incremental encoder 5 V,
with zero pulse + Hall en-
coder
Incremental encoder ROD (AquadB) 5 V, 1.5 MHz / 350 kHz with Hall (X5 / X1)
Functions:
}
Incremental encoder ROD (AquadB) with 5 V signal connected as a primary feedback
system.
}
Cutoff frequency at X5: 1.5 MHZ, at X1: 350 kHz
}
Temperature monitoring on the motor is connected to X1 and is evaluated there
Setting the parameters:
Encoder type
Incremental encoder 5 V,
with zero pulse + Hall en-
coder
Incremental encoder ROD (AquadB) 24 V, with Hall (X3, X1)
Functions:
}
Incremental encoder ROD (AquadB) with 24 V signal connected as a primary feedback
system.
}
Temperature monitoring on the motor is connected to X1 and is evaluated there
}
Cutoff frequency at X3: 100 kHz
}
Cutoff frequency at X1: 350 kHz
Setting the parameters:
Encoder type
Incremental encoder 5 V,
without zero pulse + Hall
encoder
Operating Manual PMCtendo DD5
1002236-EN-04
Parameter
FBTYPE
15
Parameter
FBTYPE
18
Parameter
FBTYPE
14
Parameter Parameter
EXTPOS GEARMODE
- -
Parameter Parameter
EXTPOS GEARMODE
- -
Parameter Parameter
EXTPOS GEARMODE
- -
50