Pilz PMCtendo DD5 Operating Manual page 154

Commissioning
Configuration Example
Components
}
PMCtendo DD5
}
PMCtendo SZxx servo motor with standard encoder
}
Mains contactor K1 (optional)
} 24 VDC power supply for control element
}
Motor and encoder cable
}
PC with installed commissioning software PASmotion. The current version is available
on our website www.pilz.com.
Operating Manual PMCtendo DD5
1002236-EN-04
INFORMATION
Recommendation: Note the sequence when switching on and switch-
ing off
Please note the correct order when switching on and switching off the servo
amplifier. Further information is provided in Chapter Normal mode.
154