Installing The Fieldbus Junction Box - Pilz PMCtendo DD5 Operating Manual

Installation
5.5

Installing the fieldbus junction box

The fieldbus junction box CAN-Adapter is installed in the slot used to hold expansion cards.
Operating Manual PMCtendo DD5
1002236-EN-04
Lever the cover off using
a suitable screwdriver.
Make sure that no foreign
bodies fall into the open
slot.
Remove the small cover
grille.
Press the small cover
grille back on to the small
part of the slot.
Screw the spacer bolts
into the slot's mounting
lugs.
Insert the CAN Adapter
into the slot.
Turn the screws into the
thread on the spacer
bolts.
Connect the female D-
Sub socket into the X6
connector on the servo
amplifier.
77