Key Functions - Pilz PMCtendo DD5 Operating Manual

Commissioning
For example, you could select 0: Analogue In1=Speed/Current Setpoint Value in the
Analogue Input Function list. This way you activate the analogue input ANALOG-IN1
on X3 with +10 ... -10 VDC.
3. Click on the
the servo amplifier.
4. Enable the axes:
–
–
5. The motor turns when a voltage of +10 ... - 10 V is present at the input ANALOG-IN1+/
ANALOG-IN1-.
7.3 LEDs and keys
The servo amplifier has a 3-digit LED display for status, error and warning messages.
The two keys can be used to navigate the menus and also to enter numerical values for
setting parameters.
7.3.1

Key functions

The keys have the following functions:
Key
The diagram below illustrates the function of the keys and LEDs.
Fig.: Key functions
Operating Manual PMCtendo DD5
1002236-EN-04
button (ENABLE) in the service bar to issue the software enable for
Switch on the mains voltage: Close the S3 switch "Mains on"
Close the S2 switch "HW-Enable".
Description
Press once: move up one menu item, in-
crease number by one
Press twice in quick succession: increase
number by ten
Press once: move down one menu item,
decrease number by one
Press twice in quick succession: De-
crease the number by ten
Hold down right-hand button and then
press left-hand button: enter numbers,
confirm entry
159