NTT docomo STYLE Series Instruction Manual page 291

2
Configure the settings.
: Please contact GPS information providers for the setting details.
When location information is requested
Location provision starts when the request to provide the location
information is received.
When each service usage setting is set to [許可], the location
information is automatically provided upon request.
When each service usage setting is set to [毎回確認], a
confirmation screen asking whether to provide appears at every
request. Select [Yes] to start providing the location information.
If no operation is performed when the location is requested, return
to stand-by display after providing location information is end, and
the stock icon @ (Send loc - Resp/Send loc - No resp/Send loc -
Failed) appears. Select the stock icon and location histories appear.
To cancel Location provision, press i and press t. However, the
location information may be sent depending on timing.
Sent location information may not reach a requestor of the location
information depending on the signal strength.
Host ID for Location provision may not be displayed on the screen.
When the 2in1 service is used, only Number A is available
regardless of the mode. If the location information provision is
requested with Number B, the location information is not provided,
and the failure of search is notified to the other party.
When the location information is requested from the other
party who used imadocokantan search
A confirmation screen for location provision appears at every
request. Select [Yes] to immediately notify to a rough positioning
result to the other party.
After [Yes] is selected, the GPS positioning screen appears, and a
high-accuracy positioning result is notified.
If the location provision is canceled after [Yes] is selected on a
confirmation screen for location provision, a rough positioning
result is notified to the other party. In this case, the location history
is recorded, but the location information does not appear.
When the location information is requested while in Public
mode (Drive mode)
If Location provision is set to [許可] for usage settings of each
service, a confirmation screen for location provision is displayed,
the GPS positioning screen appears, and the location is provided
after GPS positioning. However, Location provision/accept,
Location provision/notify, vibrator or called LED does not operate.
When Location provision is set to [毎回確認] for usage settings of
each service, location information is not provided.
Location notification
Notifying present location information
Notify the positioned Location information of the present
location to specified service clients (information provider
supporting Location notification).
See the information of an information provider supporting Location
notification or DOCOMO website. In addition, subscription to an
information provider supporting Location notification and a service
usage fee may be required.
Sent location information may not reach an information provider
depending on the signal strength.
Using Location notification is charged.
1
In the Custom menu, select [LifeKit]/[GPS
[Loc.notification/set]/[Location notification].
2
Select the service client.
;
Select [Select from list]/select a service client/t.
;
Select [Direct input]/enter the service client ID/t.
: To cancel positioning location: Press i/t.
• Positioning may not be canceled or the location information
may be sent depending on timing.
Change sound/volume/LED color for Location notification
(nP. 85, P. 99).
menu]/
Continued on next page
289