Setting Caller Id To Send/Not Send For Each Call; Send Own No./No Caller; Sending Touch-Tone Signals - NTT docomo STYLE Series Instruction Manual

Send own no./No caller ID
Setting caller ID to send/not send
for each call
Specifications made when making a call take priority over the
method for setting in advance (nP. 46).
Specifying caller ID to send/not send when
making a call
<Caller ID setting>
1
In stand-by, enter a phone number/C/[Caller ID
setting].
2
Select the setting.
: To notify caller ID: Select [Send own no.].
: To not notify caller ID: Select [No caller ID].
: To follow the Notify caller ID setting of the network service
(nP. 45): Select [As NW setting].
3
Press s (Phone)/i (V.phone).
Alternatively, set caller ID from Submenus in the Phonebook,
Redial or Received calls details screen.
Adding 186/184 to the other party's phone
number
Adding 186 when dialing (Send own no.)
■
1
In stand-by, press 186/enter a phone
number.
2
Press s (Phone)/i (V.phone).
■ Adding 184 when dialing (No caller ID)
1
In stand-by, press 184/enter a phone
number.
2
Press s (Phone)/i (V.phone).
Pause dial

Sending touch-tone signals

Use services such as ticket reservations and bank balance
inquiries, with simple operations by saving the combinations
of phone numbers and messages (numbers) in the
phonebook.
Send touch-tone signals of the pressed number one at a time
during a call by pressing the dial keys.
• While sending a camera image: Enter the number to send.
• While sending Chara-den: Press C/[DTMF
enter numbers to send.
Saving touch-tone signals to phonebook
1
Enter a phone number in the phonebook/o.
: Press o to enter a pause [P].
2
Enter the number to send/t.
: Enter the number and press o to continue adding numbers.
3
Save the phonebook entry.
Sending messages using touch-tone signals
Pause dial is available only for voice calls.
1
Make a voice call from the phonebook with a
touch-tone signal.
: The numbers after [P] appear on the screen.
mode]/[ON]/
Continued on next page
55