NTT docomo STYLE Series Instruction Manual page 306

Effects may vary depending on the position and size of face in still
picture. Use forward-facing portraits with large and centered face
for Face stamps.
When facial contours are not properly extracted nP. 304
Pasting character stamps
1
In the image editing screen, select
[Character stamp].
2
Select the type/t.
: For [Free word]: Input text/t.
• Enter up to 22 single-byte (11 double-byte) characters. Text
that exceeds the display width is cut.
3
Adjust the location to paste with w.
: To change the font size: Press m/a.
: To change the font color: Press C/select the font color/t.
4
Press t.
: To save a still picture nP. 302
Adding a frame
<Frame>
Frames for Stand-by: 480×854, CIF: 352×288, and QCIF:
176×144 are preset in the FOMA terminal.
1
In the image editing screen, select [frame].
2
Select the type/i.
: To save a still picture nP. 302
Setting contour manually
Manually set the contour information for each part of the face used in
Face effects, Face stamp, and Facial treatment.
1
In the image editing screen, select [position].
304
<Character stamp>
[stamp]/
<Change face pos>
2
Specify face contour (red outline)/t.
1. Move [+] to upper left
of contour with w.
3
Specify right eye contour (blue outline)/t.
: To specify contour: Proceed the same operations of step 2.
4
Specify left eye contour (green outline)/t.
: To specify contour: Proceed the same operations of step 2.
5
Specify mouth outline (yellow outline)/C.
: To specify contour: Proceed the same operations of step 2.
: To save a still picture nP. 302
Making up people's faces
Whiten or add natural make up to still pictures of people's faces.
1
In the Custom menu, select [Data box]/[My picture].
2
Select a still picture/C/[Edit data]/[Facial
treatment].
3
Select an effect/t.
: To select editing types n"Editing type icons" on P. 302
: To save a still picture nP. 302
When facial contours are not properly extracted nP. 304
t
2. Move [+] to lower right
of contour with w.
<Facial treatment>