Setting A First Number To Phone Numbers; Making A Call Specifying A Sub Address; Setting An Alarm Tone For Reconnecting - NTT docomo STYLE Series Instruction Manual

3
Enter a country name/t.
: Enter up to 14 single-byte (7 double-byte) characters.
4
Enter a country code/t.
: Enter up to six digits including [+].
Int'l prefix
Setting a first number to phone
numbers
Save up to five prefixes, including international call access codes,
to place at the beginning of phone numbers. The numbers are also
available when calls are made from a phonebook, Redial or
Received calls.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[Int'l prefix].
2
Select a number to save as a new entry/t.
: To change a saved number: Select a number/t/[Change].
: To delete a saved number: Select a
[Yes].
3
Enter a prefix/t.
: Press 0 for 1+ seconds to enter [+].
: Enter up to 16 digits.
Calling with prefixes
1
In stand-by, enter a phone number/C.
: In the phonebook entry details screen: Press C/[Number
settings].
: In the details screen of Redials/Received calls: Press C.
2
Select [Add prefix setting]/[Select prefix].
3
Select a prefix/t/s.
58
number/t/[Delete]/
<Select prefix>
The caller ID may not be notified or displayed correctly depending
on the telecommunications carrier, even if Notify caller ID setting
(nP. 45) is set to "Send ID". In this case, making a call from
Received calls is not available.
Sub address
Making a call specifying a sub
address
Using a sub address allows calls to be made to specific
terminals when calling an ISDN terminal.
A sub address is a number assigned to a terminal when there are
multiple ISDN terminals for a single ISDN line. It is used in selecting
contents for V-live.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[Sub address]/[ON].

Making a call specifying a sub address

■
Ask the other party for their phone number and sub address.
1
In stand-by, enter a phone number, press * and
enter a sub address/s.
b
If is entered at the beginning of a phone number or after 186,
184 or a prefix, the numbers after
number.
Reconnect signal
Setting an alarm tone for
reconnecting
Set an alarm tone to automatically reconnect calls which are
disconnected due to the signal strength, etc.
b
are recognized as the phone