NTT docomo STYLE Series Instruction Manual page 199

• Detect up to five people's faces. When multiple face detection
frames appear, the red face detection frames is focused.
• To specify the face to adjust the focus, press $.
; Select [Spot AF]/select the focus area with w.
;
Select [Closeup].
; Select [Manual focus]/adjust the focus with v/t.
• The focus adjusting bar appears. Adjust the center line to
make it deep blue.
Focus adjusting bar
When [Def (people first)] is set, the face detection may not work
properly depending on the angle of face, the distance to the
subject or the shooting conditions. Also, the object other than face
and background may be detected as face by mistake.
Setting image and voice combination
<Switch img/voice>
When shooting a movie, select [Image + voice], [Image only] or [Voice only].
1
In the movie shooting screen, press C/[Shooting
menu]/[Switch img/voice].
2
Select the image/voice combination/t.
Shooting still pictures with a frame
<Shoot with frame>
Set and shoot still pictures with frames.
When the image size is 5M: 1920×2560, 3M: 1536×2048, FullHD:
1080×1920, UXGA: 1200×1600, 1.2M: 960×1280, or Panorama:
1280×320, shooting still pictures with a frame is not available.
Current focus position
When the Continuous mode is set in Stand-by: 480×854 or VGA:
480×640, shooting still pictures with a frame is not available.
If the image size differs from the frame size, the frame is rotated 90°.
Use frames downloaded from sites to shoot with frames.
1
In the still picture shooting screen, press
[Shooting menu]/[Shoot with frame]/[ON].
2
Select a frame/i.
: To preview: Select a frame/t.
3
Press t.
Adding various effects
Set effects for still pictures and movies to change the color tone and touch.
When the image size for still pictures is other than QVGA: 240×320
or QCIF: 176×144, Effect shot is not available. Also, when the
image size for movies is VGA: 640×480, Effect shot is not available.
Effect type
OFF To remove effects
Black & white Image contrast is expressed in monotone
Sepia Image contrast is expressed in sepia color
Sparkling Bright areas light up
Colored pencil A colored line is drawn
*1
Faded edges Image edges have a soft, blurred effect
Spectrum *2 Spectrum of motions
Ripple Adds ripple effect
Kaleidoscope (L) Adds a kaleidoscope effect with a large pattern
Kaleidoscope (S) Adds a kaleidoscope effect with a small pattern
Fish-eye Image is expressed as seen through a fish-eye lens
*1 Available only for still picture shooting.
*2 Available only for movie shooting.
C/
<Effect shot>
Continued on next page
197