Making a call to a WORLD WING subscriber
overseas
When making a call to a "WORLD WING" subscriber overseas, make
an international call to Japan regardless of your country of stay.
1
In stand-by, enter [+] (press 0 for 1+ seconds),
country code 81 (Japan) and the other party's
mobile phone number excluding 0.
2
Press s (Phone)/i (V.phone).
Receiving a call overseas
Receive a call overseas in the same way as you do in Japan.
1
Press s to receive an incoming call.
: Speak to the caller.
Even when a caller tried to notify of caller ID, it might not be
notified depending on the used telecommunications carrier.
When a call is received during international roaming, the call is
forwarded from Japan. Call charges to Japan are incurred by the
caller and receiving charges by the receiver.
Having calls to your FOMA terminal
Having calls made to your FOMA terminal from
■
Japan
To receive an international call from Japan, have your phone number
dialed just as a domestic call in Japan.
090 (or 080)-XXXX-XXXX
Calling from Received calls may not be available since the phone
number may not be displayed correctly.
■
Having calls made to your FOMA terminal from
countries other than Japan
Have the international call access code and 81 (Japan) added to the
beginning of your phone number, and 0 excluded as an international
call to Japan regardless of your country of stay.
International call access code of the country of the caller-81-90
(or 80)-XXXX-XXXX
Network search mode
Setting a search method of
telecommunications carrier
Set to manually select a telecommunications carrier.
Re-search a network to set another telecommunications carrier.
Check that the Network search mode is set to [Auto] when A
appears even after homecoming.
If set [Manual] and select a telecommunications carrier overseas,
switch to the FOMA network (DOCOMO) manually or change to
[Auto] after homecoming.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[International
Roam.]/[Network search mode].
2
Select the setting.
;
Select [Auto]/[Yes].
• When [Auto] is already set: Select [Auto].
;
Select [Manual]/select a telecommunications carrier/t.
• The telecommunications carrier is changed.
;
Select [Network re-search].
• The host network is changed automatically if the Network
search mode is set to [Auto]. If set to [Manual], select a
telecommunications carrier and press t.
393
Need help?
Do you have a question about the STYLE Series and is the answer not in the manual?