NTT docomo STYLE Series Instruction Manual page 383

2
Select the service.
;
Select [Set multi number]/select a phone number to
t/[Yes].
• Set a phone number to use.
;
Select [Check setting].
;
Select [Number setting]/[Additional No1]/[Additional
No2]/enter a name/t/enter a phone
select a ring tone/i.
• Register Multi Numbers.
• Enter up to 14 single-byte (7 double-byte) characters for a
name, and 26 digits for a phone number.
Calling from selected phone number
1
In stand-by, enter a phone number/C/[Sel Multi
number].
2
Select a phone number to use/t/s (Phone)/
i (V.phone).
Even if the Submenu is displayed in the phonebook, Redial, or
Received calls details screen, the phone number can be selected.
Editing/Deleting Multi Number
1
In the Custom menu, select [Settings]/[Other NW
Services]/[Multi number]/[Number setting].
2
Select a number/t/select an item.
;
Select [Edit]/edit a Multi Number.
• Editing procedures are the same as when saving (nP. 381).
;
Select [Delete]/[Yes].
2in1
use/
Using 2in1
2in1 is a service that two phone numbers and two mail
addresses can be used on one mobile phone with dedicated
mode function as if two different mobile phones were used.
number/t/
A mode
B mode
Dual mode Available operations are those of both the A and B
Use Address B to exchange mail at the dedicated WEB Mail site.
Packet transmission is available even in the B mode if i-mode is
subscribed.
For details on using functions in each mode nP. 384
When a call/transmission is made from an external device with 64K
data communication, Number A is used when 2in1 mode is set to [A
mode]/[Dual mode]. Number B is used when 2in1 mode is set to [B
mode]. However, if Redial is performed with the AT command when
[Dual mode] is set, Redial is performed with the last dialed number.
Refer to "Mobile Phone User's Guide [2in1]" for details on 2in1.
Starting to use 2in1
1
In the Custom menu, select [Settings]/[NW
Services]/[2in1 setting].
: In stand-by: Press 8 (for 1+ seconds).
• When the 2in1 is used, the 2in1 mode is switched.
2
Enter the terminal security code/t.
Available operations are calling from your phone
number (Number A), sending/receiving i-mode mail
(Address A) and viewing related information.
Available operations are calling from the 2in1 phone
number (Number B), accessing to sites for which WEB
Mail (Address B) can be used and viewing related
information.
modes.
<2in1 setting>
Continued on next page
381