NTT docomo STYLE Series Instruction Manual page 510

16
Check all options to show H and
click [OK].
: Properties screen of the host reappears.
17
Click [OK] on the [プロパティ ]
(Properties) screen.
: The host and TCP/IP protocol are set.
: Refer to P. 19 for details on connecting to
dial-up network.
Setting a dial-up network on Windows
■
2000
On Windows 2000, use ネットワークの接続ウィ
ザード (Network connection wizard) to set both
the host (APN) and TCP/IP protocol.
Example: Using <cid>=3 to connect to mopera U,
the DOCOMO Internet connection
service
Subscription to mopera U requires a charge.
1
Click [スタート] (Start) menu b [プログラ
ム] (Programs) b [アクセサリ]
(Accessories) b [通信] (Communications)
b [ネットワークとダイヤルアップ接続]
(Network and dial-up connections).
: The network and dial-up connections screen
appears.
2
Double-click the [新しい接続の作成]
(Create new connection) icon.
: The location information screen appears.
: This screen appears the first time the [新しい接
続の作成] (Create new connection) icon is
double-clicked.
For the second and subsequent times, proceed
to step 5.
3
Enter [市外局番] (Area code) and
click [OK].
: The phone and modem options screen appears.
4
Click [OK].
: A network connection wizard screen appears.
5
Click [次へ] (Next).
: The screen to select network connection type
appears.
6
Select [インターネットにダイヤル
アップ接続する] (Dial-up to the
Internet) and click [次へ] (Next).
: A wizard startup screen appears.
7
Select [インターネット接続を手動で
設定するか、またはローカルエリア
ネットワーク (LAN) を使って接続し
ます] (Connect to Internet manually
or through local area network
(LAN)) and click [次へ] (Next).
: The screen to select the Internet appears.
8
Select [電話回線とモデムを使ってイ
ンターネットに接続します] (Connect
through phone line and modem)
and click [次へ] (Next).
: The screen to specify the modem appears.
9
Confirm that [FOMA SH02A] is set in
[インターネットへの接続に使うモデムを選
択する] (Select modem to use to connect
to the Internet) and click [次へ] (Next).
: The Internet account connection information
screen appears.
: Set to [FOMA SH02A] if not set.
: The screen appears only when multiple
modems are installed.
10
Enter the host number in the [電話
番号] (Phone number) field and
click [詳細設定] (Advanced).
: Advanced connection properties screen appears.
: Confirm that [市外局番とダイヤル情報を使う]
(Use area code and dial-up information) shows
H. When E appears instead, change to H.
17