NTT docomo STYLE Series Instruction Manual page 168

Using Phone To (AV Phone To)
Use phone number data to make a voice/Videophone call and send an
SMS.
1
Select phone number data/t.
2
Make a call.
Phone To (AV Phone To) is not available while Keypad dial lock is
set.
Using Mail To
Use mail address data to send a mail.
1
Select mail address data/t.
2
Compose and send a mail.
Mail To may not be available if two or more mail addresses appear
together.
Up to 50 single-byte character mail addresses are valid. Portions
of addresses exceeding 50 characters are deleted after the 50th
character.
i-mode mail cannot be sent using Mail To while Keypad dial lock is
set.
Mail To is not available when the 2in1 mode is set to [B mode].
Using i-appli To
Use i-appli address (URL) data to start i-appli.
1
Select i-appli address (URL) data/t/[Yes].
Start i-appli when i-appli To settings are set to [Yes].
i-appli does not start with URLs which exceed 512 single-byte
characters.
166
Using Web To
Use address (URL) data to view sites, etc.
1
Select address (URL) data/t.
Sites, etc. with URLs which exceed 2,033 single-byte characters
cannot be viewed.
Using Web To while displaying i-mode mail
■
1
Select address (URL) data in an i-mode mail
message/t.
2
Select the connection method.
: To connect using i-mode: Press i.
: To connect using Full Browser: Press a.
Using Media To
Start 1Seg from the link of program information or set a timer for
starting or recording a program.
1
Select the link of program information/t.
If 1Seg is activated from Media To without making the Channel
setting, the Channel setting is activated.