NTT docomo STYLE Series Instruction Manual page 499

2
Click [デバイスマネージャ ] (Device
manager) in [タスク] (Task).
: The device manager screen appears.
For Windows XP and Windows 2000
: Click the [ハードウェア] (Hardware) tab and
then click [デバイスマネージャ ] (Device
manager).
3
Click on each device, and confirm
the name of the installed device.
Confirm that the names of all the installed devices
are displayed for [ユニバーサル シリアル バス コ
ントローラ] (Universal Serial Bus controllers),
[ポート (COMとLPT)] (Ports (COM and LPT)) and
[モデム] (Modems).
If recognized, they will appear in this manner.
: The following drivers are installed when the
FOMA communication configuration file is
installed.
Device type
Universal Serial
Bus controllers
For Windows XP
and Windows 2000
USB (Universal
Serial Bus)
controllers
Ports (COM and
LPT)
Modem
* The "x" from "COMx" is a number and differs
depending on the PC.
If installation fails or [FOMA SH02A] does not appear
in the screen of step 3, uninstall the file and then
install it again. Refer to "Uninstalling FOMA
communication configuration file (Driver)" for steps
on uninstalling.
Device name
FOMA SH02A
FOMA SH02A Command
Port (COMx) *
FOMA SH02A OBEX
Port (COMx) *
FOMA SH02A
Uninstalling FOMA communication
configuration file (Driver)
This section describes how to uninstall the FOMA
communication configuration file.
When uninstalling the FOMA communication
configuration file, the PC user must have administrator
rights. An error will occur when other users attempt to
uninstall this software.
Contact the computer manufacturer or Microsoft
Corporation for information about configuring the
administrator rights setting.
Uninstalling from control panel
■
Example: Uninstalling from Windows Vista
1
Click [スタート] (Start) menu b [コン
トロールパネル] (Control panel), and
then click the [プログラムと機能]
(Programs and features) icon.
: The [プログラムのアンインストールまたは変
更] (Uninstall or change programs) screen
appears.
For Windows XP
: Click [スタート] (Start) menu b [コントロール
パネル] (Control panel) and click the [プログラ
ムの追加と削除] (Add/Remove programs) icon.
The [プログラムの追加と削除] (Add/Remove
programs) screen appears.
For Windows 2000
: Click [スタート] (Start) menu b [設定]
(Settings) b [コントロールパネル] (Control
panel) and double-click the [アプリケーション
の追加と削除] (Add/Remove application) icon.
The [アプリケーションの追加と削除] (Add/
Remove application) screen appears.
2
Double-click [FOMA SH02A USB].
For Windows XP and Windows 2000
: Select [FOMA SH02A USB] and click [変更と削
除] (Change/Remove).
3
When [FOMA SH02A ドライバーのア
ンインストールを行います。]
(Uninstall FOMA SH02A driver.)
appears, click [はい] (Yes).
: Uninstallation of the FOMA communication
configuration file begins.
4
When [アンインストールは完了しま
した。PCを再起動してください。]
(Uninstallation of the driver is
completed. Restart the PC.)
appears, click [OK] and restart the
PC.
: Uninstallation of the FOMA communication
configuration file finishes.
6