NTT docomo STYLE Series Instruction Manual page 213

■ Deleting a channel list
The channel list being used cannot be deleted.
1
Select a channel list/C/[Delete].
2
Select the deletion method.
;
Select [Delete one].
;
Select [Delete selected]/select a channel list/t/C.
;
Select [Delete all]/enter the terminal security code/t.
3
Select [Yes].
Deleting a broadcast station in channel list
■
When only one station is saved, it cannot be deleted.
1
Select a channel list/i/select a broadcast
station/C/[Delete]/[Yes].
Changing remote control number
■
Those channels that are assigned to No. 1 to 12 on the remote
control can be selected with one-touch operation (nP. 211).
1
Select a channel list/i/C/[Change remote
no.].
2
Select a broadcast station/t.
3
Select a new remote control number/t.
Activate 1Seg
Watching 1Seg
The reception status of 1Seg may become bad when the FOMA
terminal is closed. Use 1Seg with the FOMA terminal opened.
1
In stand-by, press C (for 1+ seconds).
: In the Custom menu: Select [1Seg]/[Activate 1Seg].
: When the message confirming whether to initialize the broadcast
storage area appears, check the content and press t.
<Delete>
<Delete>
<Change remote no.>
Activate 1Seg from program information on sites or mail (nP. 166).
When 1Seg is activated in Manner mode, the message whether to
sound appears. Select the setting.
While watching 1Seg, the color such as a color theme may appear
differently.
Key operations for 1Seg watching screen
Video mode
■
To select a station with UP/DOWN
To select a station with one-touch operation
To select a station by searching a
*2, 4
frequency
To adjust volume (volume 0 to 10)
To mute/disable
To turn Caption Settings ON/OFF
To activate the Program guide i-appli
To record a movie of 1Seg programs
To record 1Seg programs as a still picture
To switch video/data broadcasting mode
To switch vertical/horizontal display
To display broadcast station/program name
*6
or icons temporarily
To end 1Seg
*1 Select a station in order/reverse order of the remote control
numbers 1 to 62.
*2 When in the horizontal display, operations for u and v are
switched. Hold the FOMA terminal sideways and perform operations.
*3 1 to 9, *, 0, and # correspond to remote control No. 1 to
9, 10, 11, and 12, respectively.
v
*1, 2
1 to 9, *, 0, #
*3
r (for 1+ seconds)/
q (for 1+ seconds)
u
*2, 5
s
s (for 1+ seconds)
a
i (for 1+ seconds)
To stop recording:
Press i.
i
m
t
* (for 1+ seconds)
c/H/[Yes]
Continued on next page
211