NTT docomo STYLE Series Instruction Manual page 224

■ Displaying reservation recording history details
The following information is shown.
Recording results
Start time End time
Broadcaster name
1
Select a reservation recording history/t.
: To view recorded video list screen: Press i.
Deleting reservation recording history
■
1
Select a reservation recording history/C.
: In the reserved recording history details screen: Press
[Delete one]/[Yes].
2
Select the deletion method.
;
Select [Delete one].
;
Select [Delete selected]/select a reservation recording
history/t/C.
;
Select [Delete all]/enter the terminal security code/t.
3
Select [Yes].
Using data broadcasting
Use data broadcasting as well as video, voice and sound for
1Seg. In data broadcasting, use a variety of information
including still pictures and movies. For example, connect
sites available in programs, submit your opinion, etc.
1
In the 1Seg watching screen, press C/[Switch].
: Alternatively, press m to switch the operation.
: Data broadcasting mode is set (Each time this key is pressed, the
mode switches between video mode and data broadcasting mode).
: For details on operation in data broadcasting mode nP. 212
2
Select an item/t.
: For details on operations while a site is displayed nP. 157
222
Destination
Remote control no.
Program name
<Delete>
C/
A sound may be played during display of data broadcasting/data
broadcasting sites.
In the Multi Window display, it is not possible to switch to data
broadcast mode (Data broadcast operation is not possible).
On the data broadcast screen, select [Yes(Always)]. From the next
time, the confirmation screen is not displayed and the data for the
data broadcasting/data broadcasting site may be automatically
updated. In such cases, packet transmission charges may apply.
To show the confirmation screen for data broadcasting again,
perform Reset status display (nP. 224).
1Seg ends when a PC movie is played back from a Full Browser
site or a melody or i-motion is played back from an i-mode site.
A confirmation screen is displayed in the following cases. Select
[Yes]/[Yes(Always)] and then execute the operation. Select
[Yes(Always)] to subsequently not display the confirmation screen.
When deleting the the broadcast storage area
When using data in the broadcast storage area
When transmitting data to a data broadcast site
When connected to an i-mode site
When recording acquired data
When accessing to a Full Browser site
* [Yes(Always)] does not appear.
TVlink
Using TVlink
Save memo information and URL in some data broadcasting
as TVlink. Use the TVlink list screen to show memo
information and a site saved there.
Up to 100 entries can be saved as TVlink.
Saving as a TVlink
1
Select an item that can be saved as TVlink/t/[Yes].
: Procedures for saving TVlinks differ depending on the program.
*