NTT docomo STYLE Series Instruction Manual page 433

Problem
Ring tone Is the phone ring volume set to [Volume 1]
does not to [Volume 10] or [Step]?
sound Is the Voice Mail Service active and is the
ringing time set to more than [1 second]?
Is Public mode (Drive mode) disabled?
Is Manner mode disabled?
When a When a mail ring tone is set for a specific
message is group, the mail ring tone that set for the
received, a group sounds.
different ring When different mail ring tones are set for
tone sounds both individual and group, the mail ring
tone for the individual sounds.
When multiple messages are received,
the specific mail ring tone of the last
person sounds.
When a call When a call or mail is received from the
or mail is other party for which group called LED/
received, LED group mail LED is set, LED flashes
flashes in
according to the LED settings that are
another way made for the group.
than settings When a call or mail is received from the
other party for which both phonebook
called LED/phonebook mail LED and
group called LED/group mail LED are set,
LED flashes according to the LED settings
made with phonebook called LED/
phonebook mail LED.
When multiple messages are received,
LED flashes according to the LED settings
made for the last received mail address.
[Service not Subscription is required to use i-mode.
registered] If contract is made for i-mode after
appears purchase, turn off the FOMA terminal
power and restart.
Explanation Page
P. 85
P. 373
P. 62
P. 88
P. 78
P. 84
P. 78
P. 99
P. 43
Problem
Display is Is the FOMA terminal turned on?
blank Is the battery level sufficient?
Is Power saver mode disabled?
Is Auto power OFF set to disable?
Screen is Is VeilView set to disable?
washed out or
patterns
appear
IC card (for Is IC card lock or Omakase Lock
FeliCa disabled?
functions) is Is the battery level sufficient?
unusable Even after the power is turned off, IC card
–
functions may be used by holding the b
mark over the scanning section of the
external device. However, the functions
may not be used if the battery pack is not
used for a long time or remains empty
after the alert tone indicating the battery
empty sounds.
Data is not Is a USB HUB used? If used, the
transferred operation may not work correctly.
Cannot watch Is the handset inside the area of a
1Seg terrestrial digital TV broadcasting service
or in a place with enough signal?
Is Channel setting set?
Cannot
i-mode subscription is required to use the
position the service.
–
present
location
Cannot use Is the location service client set correctly?
–
location Is Location provision ON/OFF set to [Loc.
notification/ provision:ON]?
location Is the settings required for location
provision provision made with Service settings?
Explanation Page
P. 43
P. 43
P. 94
P. 342
P. 102
P. 107
P. 268
P. 43
P. 208
P. 210
P. 289
P. 286
P. 288
–
–
431