NTT docomo STYLE Series Instruction Manual page 204

Hide thumbs Also See for STYLE Series:
Table of Contents

Advertisement

Using text from bar codes (JAN/QR codes)
Use scanned text from bar codes (JAN/QR codes) for functions
such as connecting to i-mode or Full Browser, composing mail,
making voice/Videophone calls, composing SMS and running
i-appli.
Some bar codes cannot be scanned depending on types or sizes.
Bar codes may not be scanned due to scratches, dirt, damage, poor
print quality, lighting conditions or QR code version.
1
In the Custom menu, select
[Camera]/[LifeKit]/[Bar code
reader].
2
Display bar code (JAN/QR code) to be scanned in
the center of the screen/t.
: Position the camera approximately 10 cm from the bar code
(JAN/QR code). Keep aligned and do not move the FOMA
terminal or code while scanning.
: When scanning is complete, an end tone is heard and scan
results appear.
: To interrupt scanning: Press i/c.
202
Approx. 10 cm
Split data
: QR code may be split into a multiple set of
codes (maximum 16) which can be compiled
into one set of data. If split data is scanned, a
message appears. The parentheses show
remaining codes/total codes. Select [Yes] to
proceed to the next QR code scanning
screen. When the next QR code appears in the center of the
screen, scanning starts automatically. Repeat until all split data
is scanned. Scan results appear.
3
Use the scanned results.
: When scanned characters and numbers are underlined: Select
the scanned text/t.
• Based on the type of scanned text, a screen appears.
: To copy all scanned text: Press i.
: To copy a part of scanned text: Press C/[Copy]/select the
starting point/t/select the ending point/t.
: To save scanned data: Press C/[Save]/select the save
destination/t.
• Save up to five entries.
Activating Bar code reader in URL entry screen or
text input screen for a site
1
In the text input screen, press C/[Quote]/[Bar
code reader].
Scanning and using images/ToruCa/melodies
from QR codes
1
Scan QR code.
: In the scan results screen, [Image]/[Melody]/[ToruCa] appears
depending on the scanned data.
2
Press t/select a usage/t.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STYLE Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Style sh-02a

Table of Contents