NTT docomo STYLE Series Instruction Manual page 71

Switching between main camera and sub
camera
<Main/sub camera>
1
While sending a camera image, press C/[Main/
sub camera].
: Alternatively, press m to switch the cameras.
When a Videophone call ends, the camera is reset to the sub
camera.
Alternatively, when the DTMF mode is set to [OFF], press # to
switch the cameras.
If the battery level is $ or less, or the camera area is hot, the
main camera cannot be used. While the main camera is used, the
main camera becomes unavailable and is switched to a substitute
image. While the sub camera is used, switching to the main
camera is not possible.
Adjusting brightness
1
While sending a camera image, press u (for 1+
seconds).
Changing an image when making a call
<V.phone image>
The Videophone image is enabled only for the current outgoing call.
1
In stand-by, enter a phone number/C.
: In the phonebook entry details screen: Press C.
: In the details screen of Redials/Received calls: Press C.
2
Select [V.phone image].
3
Select the image to send.
;
Select [My side] (camera image).
;
Select [Chara-den]/select Chara-den/i.
Setting a substitute image, on hold image or
hold image
<Substitute image/On hold image/Hold image>
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[Set sending image].
2
Select an item/t.
3
Select an image/i.
While sending a still picture as substitute image, the still picture is
sent to the other party with [Camera Off] superimposed.
Substitute images are sent in the following order.
Priority (high b low)
Image Set a substitute image in the phonebook b Set a
substitute image in the Videophone setting
Setting outgoing image quality
Set whether to prefer image quality or prefer motion speed.
Prefer img qual To place an emphasis on shape and color
Normal To create a balance of clarity and movement
Prefer motion spd To place an emphasis on movement
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[Visual preference].
: During a Videophone call: Press C/[Videophone set]/[Visual
preference].
2
Select the image quality/t.
The image quality settings for the sender and receiver during a
Videophone call differ.
When the setting is made during a Videophone call, the setting is
enabled only for the current call.
<Visual preference>
69